HIKVISION DS-K1T341C Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-K1T341C Series
  6. User manual

HIKVISION DS-K1T341C Series User Manual

Face recognition terminal
Hide thumbs Also See for DS-K1T341C Series:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T341C Series Face Recognition
Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T341C Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K1T341C Series

Summary of Contents for HIKVISION DS-K1T341C Series

  • Page 1 DS-K1T341C Series Face Recognition Terminal User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K1T341C Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
  • Page 5 DS-K1T341C Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T341C Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 DS-K1T341C Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 8 DS-K1T341C Series Face Recognition Terminal User Manual Cautions: Do not drop the device or subject it to physical shock, and do not expose it to high ● electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
  • Page 9 DS-K1T341C Series Face Recognition Terminal User Manual Available Models Product Name Model Wireless Face Recognition Terminal DS-K1T341CM 13.56 MHz Card Presenting Frequency DS-K1T341CMW 13.56 MHz Card Presenting Frequency, Wi-Fi, 2.4G DS-K1T341CMF 13.56 MHz Card Presenting Frequency DS-K1T341CMFW 13.56 MHz Card Presenting Frequency, Wi-Fi, 2.4G...

  • Page 10: Table Of Contents

    DS-K1T341C Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 2 Chapter 3 Installation ......................... 4 3.1 Installation Environment ......................4 3.2 Install with Gang Box ......................4 3.3 Install without Gang Box ......................
  • Page 11 DS-K1T341C Series Face Recognition Terminal User Manual 6.6 Privacy Settings ........................37 6.7 Set Administrator ......................... 39 Chapter 7 Basic Operation ......................42 7.1 Login ............................ 42 7.1.1 Login by Administrator ....................42 7.1.2 Login by Activation Password ..................45 7.1.3 Forgot Password ......................
  • Page 12 DS-K1T341C Series Face Recognition Terminal User Manual 7.5.2 Authenticate via Multiple Credential ................69 7.6 Basic Settings ........................70 7.7 Set Biometric Parameters ....................72 7.8 Set Access Control Parameters .................... 74 7.9 Time and Attendance Status Settings .................. 76 7.9.1 Disable Attendance Mode via Device .................
  • Page 13 DS-K1T341C Series Face Recognition Terminal User Manual 8.5.6 Upgrade and Maintenance ..................97 8.5.7 Log Query ........................99 8.5.8 Security Mode Settings ....................99 8.5.9 Certificate Management ................... 100 8.5.10 Change Administrator's Password ................101 8.5.11 View Device Arming/Disarming Information ............101 8.5.12 Network Settings .....................
  • Page 14 DS-K1T341C Series Face Recognition Terminal User Manual 9.4.1 Add Organization ...................... 136 9.4.2 Configure Basic Information ..................136 9.4.3 Issue a Card by Local Mode ..................137 9.4.4 Upload a Face Photo from Local PC ................139 9.4.5 Take a Photo via Client ....................140 9.4.6 Collect Face via Access Control Device ..............
  • Page 15 DS-K1T341C Series Face Recognition Terminal User Manual 9.7.1 Configure Device Parameters ..................157 9.7.2 Configure Remaining Open/Closed ................162 9.7.3 Configure Multi-Factor Authentication ..............163 9.7.4 Configure Custom Wiegand Rule ................166 9.7.5 Configure Person Authentication Mode ..............167 9.7.6 Configure Card Reader Authentication Mode and Schedule ........168 9.7.7 Configure First Person In ...................
  • Page 16 DS-K1T341C Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture ............ 197 Appendix C. Tips for Installation Environment ................ 199 Appendix D. Dimension ......................200 Appendix E. Communication Matrix and Device Command ............. 201...

  • Page 17: Chapter 1 Overview

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc.

  • Page 18: Chapter 2 Appearance

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal: Figure 2-1 Face Recognition Terminal Diagram Table 2-1 Description of Face Recognition Terminal Description microUSB Interface Note USB to micro USB cable is included in the package.
  • Page 19 DS-K1T341C Series Face Recognition Terminal User Manual Description IR Light Camera Camera White Light IR Light Display Screen Fingerprint Module Note Supported by parts of the device modules. Card Presenting Area : This sticker means "Hot parts! Burned fingers when handling the parts. Wait one-half hour after switching off before handling parts."...

  • Page 20: Chapter 3 Installation

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. ● For better recognition, there should be light source in or near the installation environment. ● The minimum bearing weight of the wall or other places should be 3 times heavier than the ●...
  • Page 21 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-1 Install Gang Box 2. Use 2 supplied screws (SC-K1M4×6-SUS) to secure the base plate on the gang box.
  • Page 22 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-2 Secure Base Plate 3. Use another 4 supplied screws (KA4×22-SUS) to secure the mounting plate on the base plate.
  • Page 23 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-3 Install Mounting Plate 4. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables. 5. Align the device with the mounting plate and hang the device on the mounting plate.
  • Page 24 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-4 Hang Device 6. Use 1 supplied screw (SC-KM3X6-H2-SU) to secure the device and the mounting plate.
  • Page 25 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-5 Secure Device 7. Apply Silicone sealant among the joints between the device rear panel and the wall (except the lower side) to keep the raindrop from entering.

  • Page 26: Install Without Gang Box

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-6 Apply Silicone Sealant on the Side 8. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 3.3 Install without Gang Box...
  • Page 27 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-7 Mounting Template...
  • Page 28 DS-K1T341C Series Face Recognition Terminal User Manual 2. Drill holes on the wall or other surface according to the instructions on the mounting template. 3. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables.
  • Page 29 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-9 Hang Device 6. Use one supplied screw to secure the device and the mounting plate.
  • Page 30 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-10 Secure Device 7. Apply Silicone sealant among the joints between the device rear panel and the wall (except the lower side) to keep the raindrop from entering.
  • Page 31 DS-K1T341C Series Face Recognition Terminal User Manual Figure 3-11 Apply Silicone Sealant on the Side 8. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen.

  • Page 32: Chapter 4 Wiring

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 4 Wiring You can connect the RS-485 terminal with the RS-485 card reader, connect the NC and COM terminal with the door lock, connect the SENSOR terminal with the door contact, the BTN/GND terminal with the exit button, and connect the Wiegand terminal with the Wiegand card reader or the access controller.

  • Page 33: Wire Normal Device

    DS-K1T341C Series Face Recognition Terminal User Manual Group Function Color Name Description White/Yellow Common White/Red Lock Wiring (NO) Yellow/Green SENSOR Door Contact Black Ground Yellow/Gray BUTTON Exit Door Wiring Yellow/Black Ground 4.2 Wire Normal Device You can connect the terminal with normal peripherals.

  • Page 34: Wire Secure Door Control Unit

    DS-K1T341C Series Face Recognition Terminal User Manual Note You should set the face recognition terminal's Wiegand direction as Input to connect to a ● Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller.
  • Page 35 DS-K1T341C Series Face Recognition Terminal User Manual Type 1 Note The fire system controls the power supply of the access control system. Figure 4-3 Wire Device Figure 4-4 Wire Secure Door Control Unit Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series.

  • Page 36: Wiring Diagram Of Door Locked When Powering Off

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 4-5 Wiring Device Figure 4-6 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off...
  • Page 37 DS-K1T341C Series Face Recognition Terminal User Manual Note The Uninterpretable Power Supply (UPS) is required. ● The fire system (NC and COM, normally closed when powering off) is connected with the lock ● and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NC and COM are open.

  • Page 38: Chapter 5 Activation

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.

  • Page 39: Activate Via Web Browser

    DS-K1T341C Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 40: Activate Via Sadp

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 41: Activate Device Via Client Software

    DS-K1T341C Series Face Recognition Terminal User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.
  • Page 42 DS-K1T341C Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 43: Chapter 6 Quick Operation

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system.
  • Page 44 DS-K1T341C Series Face Recognition Terminal User Manual Figure 6-1 Select System Language By default, the system language is English. Note After you change the system language, the device will reboot automatically.

  • Page 45: Set Password Change Type

    DS-K1T341C Series Face Recognition Terminal User Manual 6.2 Set Password Change Type After activating the device, you can set the password change type as reserved email address or security questions. Once you forgot the device password, you can change the password via the selected change type.
  • Page 46 DS-K1T341C Series Face Recognition Terminal User Manual Figure 6-2 Password Change Page Change via Security Questions If you need to change password via security questions, you can tap Change to Security Questions on the right corner. Select the security questions and enter the answers. Click Next.

  • Page 47: Set Application Mode

    DS-K1T341C Series Face Recognition Terminal User Manual Note You can only select one type to change password. If you need, you can enter the web page to set both of the changing types. 6.3 Set Application Mode After activating the device, you should select an application mode for better device application.
  • Page 48 DS-K1T341C Series Face Recognition Terminal User Manual Figure 6-3 Welcome Page 2. Tap OK to save. Note You can also change the settings in System Settings. ● If you install the device indoors near the window or the face recognition function is not ●...

  • Page 49: Set Network Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual If you do not configure the application mode and tap Next, the system will select Indoor by ● default. If you activate the device via other tools remotely, the system will select Indoor as the ●...
  • Page 50 DS-K1T341C Series Face Recognition Terminal User Manual Figure 6-4 Select Network Note Disconnect the wired network before connecting a Wi-Fi. 2. Tap Next. Wired Network Note Make sure the device has connected to a network.

  • Page 51: Access To Platform

    DS-K1T341C Series Face Recognition Terminal User Manual If enable DHCP, the system will assign the IP address and other parameters automatically. If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Wi-Fi Select a Wi-Fi and enter the Wi-Fi's password to get connected.
  • Page 52 DS-K1T341C Series Face Recognition Terminal User Manual Figure 6-5 Access to Hik-Connect 2. Tap Next. 3. Optional: Tap Skip to skip the step. 4. Optional: Tap Previous to go to the previous page.

  • Page 53: Privacy Settings

    DS-K1T341C Series Face Recognition Terminal User Manual Note If you tap Previous to return to the Wi-Fi configuration page, you need to tap the connected Wi- Fi or connect another Wi-Fi to enter the platform page again. 6.6 Privacy Settings After activation, selecting application mode, and selecting network, you should set the privacy parameters, including the picture uploading and storage.
  • Page 54 DS-K1T341C Series Face Recognition Terminal User Manual Figure 6-6 Privacy Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating) Upload the pictures captured when authenticating to the platform automatically. Save Captured Pic. When Auth. (Save Captured Picture When Authenticating)

  • Page 55: Set Administrator

    DS-K1T341C Series Face Recognition Terminal User Manual Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the function. Upload Pic. After Linked Capture (Upload Picture After Linked Capture) Upload the pictures captured by linked camera to the platform automatically.
  • Page 56 DS-K1T341C Series Face Recognition Terminal User Manual Figure 6-7 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added. : Face forward at the camera. Make sure the face is in the face recognition area. Click capture and click to confirm.
  • Page 57 DS-K1T341C Series Face Recognition Terminal User Manual : Enter the card No. or present card on the card presenting area. Click OK. 4. Click OK. You will enter the authentication page. Status Icon Description Device is armed/not armed. Hik-Connect is enabled/disabled.

  • Page 58: Chapter 7 Basic Operation

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.
  • Page 59 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-1 Admin Login 2. Authenticate the administrator's face, fingerprint or card to enter the home page.
  • Page 60 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap and you can enter the device activation password for login.

  • Page 61: Login By Activation Password

    DS-K1T341C Series Face Recognition Terminal User Manual 7.1.2 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page.

  • Page 62: Forgot Password

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-3 Home Page 7.1.3 Forgot Password If you forget the password during authentication, you can change the password.
  • Page 63 DS-K1T341C Series Face Recognition Terminal User Manual Steps 1. Hold the initial page for 3 s and slide to the left/right by following the gesture and log in the page. 2. Optional: If you have set an administrator, tap in the pop-up admin authentication page.

  • Page 64: Communication Settings

    DS-K1T341C Series Face Recognition Terminal User Manual 5. Create a new password and confirm it. 6. Tap OK. 7.2 Communication Settings You can set the network parameters, the Wi-Fi parameter, the RS-485 parameters, and the Wiegand parameters on the communication settings page.
  • Page 65 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-5 Wired Network Settings 3. Set IPv4/IPv6 IP Address, Subnet Mask, and Gateway. - Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically. - Disable DHCP, and you should set the IP address, subnet mask, and gateway manually.

  • Page 66: Set Wi-Fi Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server. 7.2.2 Set Wi-Fi Parameters You can enable the Wi-Fi function and set the Wi-Fi related parameters.
  • Page 67 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-6 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. - If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And tap OK.

  • Page 68: Set Rs-485 Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual 6. Tap OK to save the settings and go back to the Wi-Fi tab. 7. Tap to save the network parameters. 7.2.3 Set RS-485 Parameters The face recognition terminal can connect external access controller, secure door control unit or card reader via the RS-485 terminal.
  • Page 69 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-7 Set RS-485 Parameters 3. Enable RS-485 Settings. 4. Select an peripheral type according to your actual needs.

  • Page 70: Set Wiegand Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No.
  • Page 71 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-8 Wiegand Settings 3. Enable the Wiegand function. 4. Select a transmission direction. Output: A face recognition terminal can connect an external access controller. And the two ● devices will transmit the card No. via Wiegand 26 or Wiegand 34.

  • Page 72: Set Isup Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual Note If you change the external device, and after you save the device parameters, the device will reboot automatically. 7.2.5 Set ISUP Parameters Set ISUP parameters and the device can upload data via ISUP protocol.
  • Page 73 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-9 ISUP Settings 2. Enable the ISUP function and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group.

  • Page 74: Platform Access

    DS-K1T341C Series Face Recognition Terminal User Manual Main Channel Support N1 or None. ISUP Enable ISUP function and the data will be uploaded via ISUP protocol. Address Type Select an address type according to your actual needs. IP Address Set the ISUP server's IP address.

  • Page 75: User Management

    DS-K1T341C Series Face Recognition Terminal User Manual 7.3 User Management On the user management interface, you can add, edit, delete and search the user. 7.3.1 Add Administrator The administrator can log in the device backend and configure the device parameters.
  • Page 76 DS-K1T341C Series Face Recognition Terminal User Manual 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower ● letters, upper letters, and numbers. The employee ID should not be duplicated.

  • Page 77: Add Face Picture

    DS-K1T341C Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. Up to 32 characters are allowed in the user name. ● 5. Optional: Add a face picture, fingerprints, cards, or Pin for the administrator.
  • Page 78 DS-K1T341C Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the Face Picture field to enter the face picture adding page.

  • Page 79: Add Fingerprint

    DS-K1T341C Series Face Recognition Terminal User Manual 6. Look at the camera. Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate.

  • Page 80: Add Card

    DS-K1T341C Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the Fingerprint field to enter the Add Fingerprint page.

  • Page 81: View Pin Code

    DS-K1T341C Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 6. Tap the Card field and tap +.

  • Page 82: Set Authentication Mode

    DS-K1T341C Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the PIN code to view the PIN code.

  • Page 83: Data Management

    DS-K1T341C Series Face Recognition Terminal User Manual Search User On the User Management page, Tap the search area to enter the Search User page. Tap Card on the left of the page and select a search type from the drop-down list. Enter the employee ID, card No., or the user name for search.

  • Page 84: Export Data

    DS-K1T341C Series Face Recognition Terminal User Manual The imported pictures should be saved in the folder (named enroll_pic) of the root directory ● and the picture's name should be follow the rule below: Card No._Name_Department_Employee ID_Gender.jpg If the folder enroll_pic cannot save all imported pictures, you can create another folders, ●...

  • Page 85: Authenticate Via Single Credential

    DS-K1T341C Series Face Recognition Terminal User Manual 7.5.1 Authenticate via Single Credential Set the user authentication type before authentication. For details, see Set Authentication Mode . Authenticate face, fingerprint, card or QR code. Face Face forward at the camera and start authentication via face.

  • Page 86: Basic Settings

    DS-K1T341C Series Face Recognition Terminal User Manual Note For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint. ● For detailed information about authenticating face, see Tips When Collecting/Comparing Face ● Picture. If authentication succeeded, the prompt "Authenticated" will pop up.
  • Page 87 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-11 Basic Settings Page Voice Settings You can enable/disable the voice prompt function and adjust the voice volume. Note You can set the voice volume between 0 and 10.

  • Page 88: Set Biometric Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual Time Settings Set the time zone, the device time and the DST. Sleeping (s) Set the device sleeping waiting time (minute). When you are on the initial page and if you set the sleeping time to 30 min, the device will sleep after 30 min without any operation.
  • Page 89 DS-K1T341C Series Face Recognition Terminal User Manual Table 7-1 Face Picture Parameters Parameter Description Application Mode Select either others or indoor according to actual environment. Face Liveness Level After enabling face anti-​ s poofing function, you can set the matching security level when performing live face authentication.

  • Page 90: Set Access Control Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual Parameter Description Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate Face with Mask & Face(1:1 ECO) Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode.
  • Page 91 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-12 Access Control Parameters The available parameters descriptions are as follows:...

  • Page 92: Time And Attendance Status Settings

    DS-K1T341C Series Face Recognition Terminal User Manual Table 7-2 Access Control Parameters Descriptions Parameter Description Terminal Auth. Mode (Terminal Select the face recognition terminal's authentication mode. You Authentication Mode) can also customize the authentication mode. Note Only the device with the fingerprint module supports the ●...

  • Page 93: Disable Attendance Mode Via Device

    DS-K1T341C Series Face Recognition Terminal User Manual 7.9.1 Disable Attendance Mode via Device Disable the attendance mode and the system will not display the attendance status on the initial page. Tap T&A Status to enter the T&A Status page. Figure 7-13 Disable Attendance Mode...

  • Page 94: Set Manual Attendance Via Device

    DS-K1T341C Series Face Recognition Terminal User Manual You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform. 7.9.2 Set Manual Attendance via Device Set the attendance mode as manual, and you should select a status manually when you take attendance.
  • Page 95 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-14 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.

  • Page 96: Set Auto Attendance Via Device

    DS-K1T341C Series Face Recognition Terminal User Manual Result You should select an attendance status manually after authentication. Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance.
  • Page 97 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-15 Auto Attendance Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.

  • Page 98: Set Manual And Auto Attendance Via Device

    DS-K1T341C Series Face Recognition Terminal User Manual 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap Confirm.
  • Page 99 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-16 Manual and Auto Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.

  • Page 100: System Maintenance

    DS-K1T341C Series Face Recognition Terminal User Manual 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap OK.
  • Page 101 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-17 Maintenance Page System Information You can view the device model, serial No., versions, address, production data, QR code, and open source code license. Note The page may vary according to different device models. Refers to the actual page for details.

  • Page 102: Preference Settings

    DS-K1T341C Series Face Recognition Terminal User Manual After unlinking APP account, you cannot operate via APP. Restore to Default Settings All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings. The system will reboot to take effect.
  • Page 103 DS-K1T341C Series Face Recognition Terminal User Manual Figure 7-18 Preference Settings Shortcut Key Choose the shortcut key that displayed on the authentication page, including the call function, call type, and the password entering function.

  • Page 104: Video Intercom

    DS-K1T341C Series Face Recognition Terminal User Manual Note You can select call type from Call Room, Call Center, Call Specified Room No. and Call APP. Call Room When you tap the call button on the authentication page, you should dial a room No. to call.

  • Page 105: Call Client Software From Device

    DS-K1T341C Series Face Recognition Terminal User Manual 7.12.1 Call Client Software from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up.

  • Page 106: Call Device From Client Software

    DS-K1T341C Series Face Recognition Terminal User Manual Note The device will call the main station in priority. 7.12.3 Call Device from Client Software Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts.

  • Page 107: Call Mobile Client From Device

    DS-K1T341C Series Face Recognition Terminal User Manual 7.12.5 Call Mobile Client from Device Steps 1. Get the mobile mobile client from the supplied disk or the official website, and install the software according to the prompts. 2. Run the mobile client and add the device to the mobile client.

  • Page 108: Chapter 8 Operation Via Web Browser

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 8 Operation via Web Browser 8.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation .

  • Page 109: Person Management

    DS-K1T341C Series Face Recognition Terminal User Manual Start or stop live view. Start or stop video recording. Select the streaming type when starting live view. You can select from the main stream and the sub stream. Select the window division type when starting live view.

  • Page 110: Search Event

    DS-K1T341C Series Face Recognition Terminal User Manual Click to delete it. Click OK to save the settings. Add Authentication Mode Click User → Add to enter the Add Person page. Set the authentication type. Click OK to save the settings.

  • Page 111: Configuration

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 8-1 Search Page Enter the search conditions, including the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel.

  • Page 112: View Device Information

    DS-K1T341C Series Face Recognition Terminal User Manual Set Record File Saving Path Click Configuration → Local to enter the Local page. Select a record file size and select a saving path from your local computer and click Save. You can also click Open to open the file folder to view details.

  • Page 113: Set Dst

    DS-K1T341C Series Face Recognition Terminal User Manual Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. 8.5.4 Set DST Steps 1.
  • Page 114 DS-K1T341C Series Face Recognition Terminal User Manual Figure 8-4 Upgrade and Maintenance Page Click Reboot to start reboot the device. Restore Parameters Click Configuration → System → Maintenance → Upgrade & Maintenance . Restore All All parameters will be restored to the factory settings. You should activate the device before usage.

  • Page 115: Log Query

    DS-K1T341C Series Face Recognition Terminal User Manual Upgrade Click Configuration → System → Maintenance → Upgrade & Maintenance . Select an upgrade type from the drop-down list. Click and select the upgrade file from your local PC. Click Upgrade to start upgrading.

  • Page 116: Certificate Management

    DS-K1T341C Series Face Recognition Terminal User Manual 8.5.9 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Install Self-signed Certificate Steps 1. Go to Configuration → System → Security → Certificate Management .

  • Page 117: Change Administrator's Password

    DS-K1T341C Series Face Recognition Terminal User Manual Steps 1. Go to Configuration → System → Security → Certificate Management . 2. Create an ID in the Inport CA Certificate area. Note The input certificate ID cannot be the same as the existing ones.
  • Page 118 DS-K1T341C Series Face Recognition Terminal User Manual Set Basic Network Parameters Click Configuration → Network → Basic Settings → TCP/IP . Figure 8-5 TCP/IP Settings Page Set the parameters and click Save to save the settings. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, MTU, and the device port.
  • Page 119 DS-K1T341C Series Face Recognition Terminal User Manual It refers to the port through which the client adds the device. Report Strategy Settings You can set the center group for uploading the log via the ISUP protocol. Go to Configuration → Network → Basic Settings → Report Strategy .

  • Page 120: Set Video And Audio Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual Steps 1. Click Configuration → Network → Advanced → Platform Access to enter the settings page. 2. Check the checkbox of Enable to enable the function. 3. Select the Platform Access Mode. Note Hik-Connect is an application for mobile devices.

  • Page 121: Customize Audio Content

    DS-K1T341C Series Face Recognition Terminal User Manual Set Audio Parameters Click Configuration → Video/Audio → Audio . Select the audio channel. You can also drag the block to adjust the device input and output volume. Click to enable Voice Prompt.

  • Page 122: Set Image Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual Note If authentication is failed in the configured time duration, the device will broadcast the configured content. 3) Enter the audio content. 4) Optional: Repeat substep 1 to 3. 5) Optional: Click to delete the configured time duration.

  • Page 123: Set Supplement Light Brightness

    DS-K1T341C Series Face Recognition Terminal User Manual Beauty Set whiten and smooth value for the face appeared on the device live view page. Image Fusion Wen the environment is dark, you can select Automatic to enable the image fusion function.
  • Page 124 DS-K1T341C Series Face Recognition Terminal User Manual Time Settings Steps 1. Click Configuration → Time Settings to enter the settings page. 2. Select Status Type. 3. Optional: Edit Schedule Name according to the actual needs. 4. Drag mouse to set the schedule.
  • Page 125 DS-K1T341C Series Face Recognition Terminal User Manual Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration → Attendance to enter the settings page. 2. Set the Attendance Mode as Auto.

  • Page 126: General Settings

    DS-K1T341C Series Face Recognition Terminal User Manual 8.5.18 General Settings Set Authentication Parameters Click Configuration → General → Authentication Settings . Note The functions vary according to different models. Refers to the actual device for details. Click Save to save the settings after the configuration.
  • Page 127 DS-K1T341C Series Face Recognition Terminal User Manual Enable to report alarm when the card reading attempts reach the set value. Enable Tampering Detection Enable the anti-tamper detection for the card reader. Enable Card No. Reversing The read card No. will be in reverse sequence after enabling the function.
  • Page 128 DS-K1T341C Series Face Recognition Terminal User Manual The door can open via bluetooth in Hik-connect after enabling the function. Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Go to Configuration → General → Privacy Event Storage Settings Select a method to delete the event.
  • Page 129 DS-K1T341C Series Face Recognition Terminal User Manual If you enable this function, you can save the picture captured by linked camera to the device. Clear All Pictures in Device Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted.

  • Page 130: Access Control Settings

    DS-K1T341C Series Face Recognition Terminal User Manual Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function. Enable DESFire Card The device can read the data from DESFire card when enabling the DESFire card function.
  • Page 131 DS-K1T341C Series Face Recognition Terminal User Manual Figure 8-6 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. Select the device corresponded door No. Name You can create a name for the door. Open Duration Set the door unlocking duration.
  • Page 132 DS-K1T341C Series Face Recognition Terminal User Manual The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. Super Password The specific person can open the door by inputting the super password.
  • Page 133 DS-K1T341C Series Face Recognition Terminal User Manual Click Save to save the settings after the configuration. Set the RS-485 No. Peripheral Type Select a peripheral from the drop-down list according the actual situation. You can select from Card Reader, Extension Module, Access Controller, or Disable.

  • Page 134: Video Intercom Settings

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 8-7 Wiegand Page 2. Check Wiegand to enable the Wiegand function. 3. Set a transmission direction. Input The device can connect a Wiegand card reader. Output The can connect an external access controller. And the two devices will transmit the card No.
  • Page 135 DS-K1T341C Series Face Recognition Terminal User Manual The device can be used as a door station or outer door station. Select a device type from the drop-down list. Note If you change the device type, you should reboot the device.

  • Page 136: Set Biometric Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual Configure SIP Parameters Set the device's IP address and the SIP server's IP address. After setting the parameters, you can communicate among the access control device, door station, indoor station, main station, and the platform.
  • Page 137 DS-K1T341C Series Face Recognition Terminal User Manual Note Biometric recognition products are not completely applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Live Face Detection Security Level After enabling the face anti-spoofing function, you can set the matching security level when performing live face authentication.
  • Page 138 DS-K1T341C Series Face Recognition Terminal User Manual None The function is disabled. The device will not detect whether a person is wearing a hard hat or not. Reminder of Wearing If the person do not wear the hard hat when authenticating, the device will pop up a prompt and the door will open.

  • Page 139: Set Theme

    DS-K1T341C Series Face Recognition Terminal User Manual Set the matching threshold when authenticating with face mask via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Set Recognition Area Click Configuration →...
  • Page 140 DS-K1T341C Series Face Recognition Terminal User Manual Drag the block or enter the number to set the slide show interval. The picture will be changed according to the interval. Add Media Click Configuration → Media Database . Click Add and select picture to add to the media database.

  • Page 141: Chapter 9 Client Software Configuration

    DS-K1T341C Series Face Recognition Terminal User Manual Chapter 9 Client Software Configuration 9.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 9-1 Flow Diagram of Configuration on Client Software 9.2 Device Management...

  • Page 142: Add Device

    DS-K1T341C Series Face Recognition Terminal User Manual Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations. 9.2.1 Add Device The client provides three device adding modes including by IP/domain, IP segment, and ISUP protocol.
  • Page 143 DS-K1T341C Series Face Recognition Terminal User Manual The port number is obtained automatically. User Name By default, the user name is admin. Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend...
  • Page 144 DS-K1T341C Series Face Recognition Terminal User Manual Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 145 DS-K1T341C Series Face Recognition Terminal User Manual Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 146 DS-K1T341C Series Face Recognition Terminal User Manual Delete Device Select one or multiple devices and click Delete to delete the selected device(s) from the client. Add Devices by IP Segment If the devices share the same port No., user name and password, and their IP addresses are sharing an IP segment.
  • Page 147 DS-K1T341C Series Face Recognition Terminal User Manual Note This function should be supported by the device. ● You can log into the device to get the certificate file by web browser. ● 7. Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client.
  • Page 148 DS-K1T341C Series Face Recognition Terminal User Manual 3. Select EHome as the adding mode. 4. Enter the required information. Device Account Enter the account name registered on EHome protocol. EHome Key For EHome 5.0 devices, enter the EHome key if you have set it when configuring network center parameter for the device.
  • Page 149 DS-K1T341C Series Face Recognition Terminal User Manual 5. Open the exported template file and enter the required information of the devices to be added on the corresponding column. Adding Mode You can enter 0 or 1 which indicated different adding modes. 0 indicates that the device is added by IP address or domain name;...

  • Page 150: Reset Device Password

    DS-K1T341C Series Face Recognition Terminal User Manual 9.2.2 Reset Device Password If you forgot the password of the detected online devices, you can reset the device password via the client. Steps 1. Enter Device Management page. 2. Click Online Device to show the online device area.

  • Page 151: Import Resources To Group

    DS-K1T341C Series Face Recognition Terminal User Manual - Click Create Group by Device Name and select an added device to create a new group by the name of the selected device. 9.3.2 Import Resources to Group You can import the device resources to the added group in a batch.

  • Page 152: Person Management

    DS-K1T341C Series Face Recognition Terminal User Manual All the added groups are displayed on the left. 3. Click a group to show the resources added to this group. 4. Select the resource(s) and click Delete to remove the resource(s) from the group.

  • Page 153: Issue A Card By Local Mode

    DS-K1T341C Series Face Recognition Terminal User Manual Steps 1. Enter Person module. Note For the first time you enter Person module, a window pops up, and you can set the rules to generate person ID (letters and numbers supported) when adding person. When getting person information from device, if there are no person IDs, the person IDs will be generated according to the rule.
  • Page 154 DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-2 Issue a Card by Local Mode 6. Set other related parameters. Card Enrollment Station Select the model of the connected card enrollment station. Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100- M, DS-K1F100-D8E, and DS-K1F180-D8E.

  • Page 155: Upload A Face Photo From Local Pc

    DS-K1T341C Series Face Recognition Terminal User Manual Enable or disable the buzzing when the card number is read successfully. Card No. Type Select the type of the card number according to actual needs. M1 Card Encryption This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180- D8E.

  • Page 156: Take A Photo Via Client

    DS-K1T341C Series Face Recognition Terminal User Manual 9.4.5 Take a Photo via Client When adding a person, you can take a photo of the her/him via the client and set this photo as the person's profile. Before You Start Make sure PC running the client has a camera or you have connected other USB camera to the PC.

  • Page 157: Collect Face Via Access Control Device

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-3 Take a Photo via Client 7. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.

  • Page 158: Collect Fingerprint Via Client

    DS-K1T341C Series Face Recognition Terminal User Manual Note If you select the enrollment station, you should click Login to set related parameters of the device including IP address, port No., user name, and password. Also, you can check Face Anti- Spoofing and select the liveness level as Low, Medium, or High.

  • Page 159: Collect Fingerprint Via Access Control Device

    DS-K1T341C Series Face Recognition Terminal User Manual 3) Click Add to save the recorded fingerprint. 7. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.

  • Page 160: Configure Access Control Information

    DS-K1T341C Series Face Recognition Terminal User Manual 9.4.9 Configure Access Control Information When adding a person, you can set her/his access control information, such as binding an access control group with the person, configuring PIN code, setting the person as a visitor, a blocklist person, or a super user, etc.

  • Page 161: Customize Person Information

    DS-K1T341C Series Face Recognition Terminal User Manual Extended Door Open Time Use this function for persons with reduced mobility. When accessing the door, the person will have more time than others to pass through doors. For details about setting the door's open duration, refer to Configure Parameters for Door/ Elevator .

  • Page 162: Configure Resident Information

    DS-K1T341C Series Face Recognition Terminal User Manual 1) Select an organization in the organization list to add the person and click Add. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information .

  • Page 163: Import And Export Person Identify Information

    DS-K1T341C Series Face Recognition Terminal User Manual Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. In the Additional Information panel, enter the additional information of the person, including person's ID type, ID No., job title, etc., according to actual needs.

  • Page 164: Import Person Pictures

    DS-K1T341C Series Face Recognition Terminal User Manual 9.4.15 Import Person Pictures After importing face pictures for the added persons to the client, the persons in the pictures can be identified by an added face recognition terminal. You can either import person pictures one by one, or import multiple pictures at a time according to your need.

  • Page 165: Export Person Pictures

    DS-K1T341C Series Face Recognition Terminal User Manual 9.4.17 Export Person Pictures You can export face picture file of the added persons and save in your PC. Before You Start Make sure you have added persons and their face pictures to an organization.

  • Page 166: Move Persons To Another Organization

    DS-K1T341C Series Face Recognition Terminal User Manual Steps Note If the person name stored in the device is empty, the person name will be filled with the issued ● card No. after importing to the client. If the card number or person ID (employee ID) stored on the device already exists in the client ●...

  • Page 167: Issue Cards To Persons In Batch

    DS-K1T341C Series Face Recognition Terminal User Manual 9.4.21 Issue Cards to Persons in Batch The client provides a convenient way to issue cards to multiple persons in a batch. Steps 1. Enter Person module. 2. Click Batch Issue Cards. All the added persons with no card issued will be displayed in the right panel.

  • Page 168: Configure Schedule And Template

    DS-K1T341C Series Face Recognition Terminal User Manual PC running the client by USB interface or COM, and place the card on the card enrollment to read the card number. If not, you can also swipe the card on the card reader of the added access control device to get the card number.

  • Page 169: Add Holiday

    DS-K1T341C Series Face Recognition Terminal User Manual 9.5.1 Add Holiday You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in one day. Steps Note You can add up to 64 holidays in the software system.
  • Page 170 DS-K1T341C Series Face Recognition Terminal User Manual Steps Note You can add up to 255 templates in the software system. 1. Click Access Control → Schedule → Template to enter the Template page. Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted.

  • Page 171: Set Access Group To Assign Access Authorization To Persons

    DS-K1T341C Series Face Recognition Terminal User Manual 4) Optional: Select a selected holiday in the right list and click to remove the selected one, or click Clear to clear all the selected holiday(s) in the right list. 7. Click Save to save the settings and finish adding the template.
  • Page 172 DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-5 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device.

  • Page 173: Configure Advanced Functions

    DS-K1T341C Series Face Recognition Terminal User Manual Note If you change the persons' access information or other related information, you will view the promptAccess Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later.
  • Page 174 DS-K1T341C Series Face Recognition Terminal User Manual Configure Parameters for Access Control Device After adding the access control device, you can configure its parameters, including overlaying user information on picture, uploading pictures after capturing, saving captured pictures, etc. Steps 1. Click Access Control → Advanced Function → Device Parameter .
  • Page 175 DS-K1T341C Series Face Recognition Terminal User Manual If enable the function, the device can recognize the EM card. You can present EM card on the device. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function.
  • Page 176 DS-K1T341C Series Face Recognition Terminal User Manual The alarm can be triggered if the door has not been closed in a configured time period. If it is set as 0, no alarm will be triggered. Duress Code The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event.
  • Page 177 DS-K1T341C Series Face Recognition Terminal User Manual If the interval between card swiping of the same card is less than the set value, the card swiping is invalid. You can set it as 0 to 255. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value.

  • Page 178: Configure Remaining Open/Closed

    DS-K1T341C Series Face Recognition Terminal User Manual Face 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication.

  • Page 179: Configure Multi-Factor Authentication

    DS-K1T341C Series Face Recognition Terminal User Manual Move the cursor to the time duration and drag the time duration on the timeline bar to the ● desired position when the cursor turns to Click the time duration and directly edit the start/end time in the appeared dialog.
  • Page 180 DS-K1T341C Series Face Recognition Terminal User Manual Before You Start Set access group and apply the access group to the access control device. For details, refer to Set Access Group to Assign Access Authorization to Persons . Perform this task when you want to set authentications for multiple cards of one access control point (door).
  • Page 181 DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-7 Remotely Open Door Note You can check Offline Authentication to enable the super password authentication when the access control device is disconnected with the client. Local Authentication and Super Password Authentication by the access control device and by the super password.

  • Page 182: Configure Custom Wiegand Rule

    DS-K1T341C Series Face Recognition Terminal User Manual 9.7.4 Configure Custom Wiegand Rule Based on the knowledge of uploading rule for the third party Wiegand, you can set multiple customized Wiegand rules to communicate between the device and the third party card readers.

  • Page 183: Configure Person Authentication Mode

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-8 Set Output Transformation Rule 2) Select rules on the left list. The selected rules will be added to the right list. 3) Optional: Drag the rules to change the rule order.

  • Page 184: Configure Card Reader Authentication Mode And Schedule

    DS-K1T341C Series Face Recognition Terminal User Manual Steps 1. Click Access Control → Advanced Function → Authentication . 2. Select an access control device (support the function of person authentication) on the left panel to enter the person Authentication Mode page.
  • Page 185 DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-10 Select Card Reader Authentication Mode Note PIN refers to the PIN code set to open the door. Refer to Configure Access Control Information . 2) Check the modes in the Available Mode list and they will be added to the selected modes list.

  • Page 186: Configure First Person In

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-11 Set Authentication Modes for Card Readers 6. Optional: Select a configured day and click Copy to Week to copy the same settings to the whole week. 7. Optional: Click Copy to to copy the settings to other card readers.

  • Page 187: Configure Anti-Passback

    DS-K1T341C Series Face Recognition Terminal User Manual The door remains open for the configured time duration after the first person is authorized until the remain open duration ends. If you select this mode, you should set the remain open duration.

  • Page 188: Configure Device Parameters

    DS-K1T341C Series Face Recognition Terminal User Manual 4. Click of the selected first card reader in the Card Reader Afterward column to open the select card reader dialog. 5. Select the afterward card readers for the first card reader. Note Up to four afterward card readers can be added as afterward card readers for one card reader.
  • Page 189 DS-K1T341C Series Face Recognition Terminal User Manual The maximum transmission unit (MTU) of the network interface. 6. Click Save. Set Network Parameters After adding the access control device, you can set the device log uploading mode, and create ISUP account via wired network.
  • Page 190 DS-K1T341C Series Face Recognition Terminal User Manual Note The port number of the wireless network and wired network should be consistent with the port number of ISUP. 8. Select the Protocol Type as ISUP. Note If set the ISUP version as 5.0, you should create an ISUP key for the ISUP account.
  • Page 191 DS-K1T341C Series Face Recognition Terminal User Manual 5. Set the capture times once triggered which defines how many pictures will be captures for one time. 6. If the capture times is more than 1, set the interval for each capture.
  • Page 192 DS-K1T341C Series Face Recognition Terminal User Manual Note These parameters displayed vary according to different device models. Select a COM port for configuration. COM1 refers to the RS-485 interface and COM2 refers to the RS-232 interface. Face Picture Database select Deep Learning as the face picture database.
  • Page 193 DS-K1T341C Series Face Recognition Terminal User Manual 6. Click Save. The configured parameters will be applied to the device automatically. ● When you change the working mode or connection mode, the device will reboot ● automatically. Set Wiegand Parameters You can set the access control device's Wiegand channel and the communication mode. After setting the Wiegand parameters, the device can connect to Wiegand card reader via Wiegand communication.

  • Page 194: Configure Linkage Actions For Access Control

    DS-K1T341C Series Face Recognition Terminal User Manual 5. Set the sector ID. Note The sector ID ranges from 1 to 100. ● By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. ● 6. Click Save to save the settings.

  • Page 195: Configure Device Actions For Access Event

    DS-K1T341C Series Face Recognition Terminal User Manual The client software gives an audible warning when the event is triggered. You can select alarm sound for the audible warning. Note For details about setting the alarm sound, refer to Set Alarm Sound in the user manual of the client software.

  • Page 196: Configure Device Actions For Card Swiping

    DS-K1T341C Series Face Recognition Terminal User Manual Note The target door and the source door cannot be the same one. 7. Click Save. 8. Optional: After adding the device linkage, you can do one or more of the following: Edit Linkage...

  • Page 197: Configure Device Actions For Person Id

    DS-K1T341C Series Face Recognition Terminal User Manual Edit Linkage Select the configured linkage settings in the device list and you can edit its Settings event source parameters, including event source and linkage target. 9.8.4 Configure Device Actions for Person ID You can set the access control device's linkage actions for the specified person ID.

  • Page 198: Control Door Status

    DS-K1T341C Series Face Recognition Terminal User Manual Edit Linkage Select the configured linkage settings in the device list and you can edit its Settings event source parameters, including event source and linkage target. 9.9 Control Door Status You can control the status for the door(s), including unlock door, locking door, remaining the door unlock, remaining the door locked, remain all unlocked, etc.

  • Page 199: Event Center

    DS-K1T341C Series Face Recognition Terminal User Manual All doors in the group will be unlocked (no matter closed or open). All the persons can access the doors with no credentials required. Remain All Locked All doors in the group will be closed and locked. No person can access the doors even if he/she has the authorized credentials, except the super users.

  • Page 200: View Real-Time Events

    DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-12 Arm Device After turned on, the device(s) will be armed. And notifications about the events triggered by the armed device(s) will be automatically sent to the client software in real-time. 9.10.2 View Real-Time Events The real-time event information received by the client of the connected resources are displayed.
  • Page 201 DS-K1T341C Series Face Recognition Terminal User Manual Filter by Device Type and (or) Select device type(s) and (or) priorities to filter Priority events. Filter by Keywords Enter the keywords to filter the events. 3. Optional: Right-click the table header of the event list to customize the event related items to be displayed in the event list.

  • Page 202: Search Historical Events

    DS-K1T341C Series Face Recognition Terminal User Manual 9.10.3 Search Historical Events You can search and view historical events by setting search conditions such as time, device type, and priority in the client. For the searched events, you can handle and export them.
  • Page 203 DS-K1T341C Series Face Recognition Terminal User Manual Enter a key word (supports fuzzy search) to quickly search the target historical event(s). For example, you can enter a person's name to search the events related with this person. 3. Click Search to search the events according the conditions you set.
  • Page 204 DS-K1T341C Series Face Recognition Terminal User Manual Figure 9-14 Search Historical Event 4. Optional: Right click the table header of the event list to customize the event related items to be displayed in the event list. 5. Select an event in the event list to view the event details.

  • Page 205: System Configuration

    DS-K1T341C Series Face Recognition Terminal User Manual Auto-Play Video Check Auto-Play Video to automatically play video when displaying event details. Enlarge Video or Double click the video image to view video in a larger window. ● Picture Put the cursor on the picture, and click to view picture in a larger ●...
  • Page 206 DS-K1T341C Series Face Recognition Terminal User Manual Select Gregorian Calendar or Nepali Calendar as the calendar type. If you select Nepali Calendar, the calender will switch to Nepali language and calculated time by Nepali calendar. You need to restart the client after switching the calendar.

  • Page 207: Set Picture Storage

    DS-K1T341C Series Face Recognition Terminal User Manual 9.11.2 Set Picture Storage The pictures, captured by the camera of video access control terminal, triggered by events, can be saved in the PC running the iVMS-4200 Service. You can set the picture storage location here manually.

  • Page 208: Set File Saving Path

    DS-K1T341C Series Face Recognition Terminal User Manual Steps 1. Open the System Configuration page. 2. Click the Access Control & Video Intercom tab. 3. Input the required information. Ringtone Click and select the audio file from the local path for the ringtone of indoor station.

  • Page 209: Operation And Maintenance

    DS-K1T341C Series Face Recognition Terminal User Manual 2. Click Email tab to enter the Email Settings interface. 3. Enter the required information. STMP Server The STMP server IP address of host name (e.g., smtp.263xmail.com) Encryption Type You can check the radio to select Non-Encrypted, SSL, or STARTTLS .
  • Page 210 DS-K1T341C Series Face Recognition Terminal User Manual Skin Change the skin of the client, including bright-color series and black-color series. Batch Time Sync Synchronize selected devices' time with your PC time. Message Queue After configuring email linkage, the triggered event(s) will be displayed here. Select an event and...

  • Page 211: Appendix A. Tips For Scanning Fingerprint

    DS-K1T341C Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 212 DS-K1T341C Series Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again.

  • Page 213: Appendix B. Tips When Collecting/Comparing Face Picture

    DS-K1T341C Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the ●...
  • Page 214 DS-K1T341C Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window.

  • Page 215: Appendix C. Tips For Installation Environment

    DS-K1T341C Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Install the device at least 2 meters away from the light, and at least 3 meters away from the window or door.

  • Page 216: Appendix D. Dimension

    DS-K1T341C Series Face Recognition Terminal User Manual Appendix D. Dimension Figure D-1 Dimension...

  • Page 217: Appendix E. Communication Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure E-2 Device Command...
  • Page 218 UD27829B...

This manual is also suitable for:

Ds-k1t341cmDs-k1t341cmwDs-k1t341cmfDs-k1t341cmfw

Table of Contents

Save PDF