HP 10512 Disassembly Instructions Manual page 3

47. Remove the film 12-2 from the part 12-1.
48. Unscrew the screws on pcb 10-2, and then remove pcb 10-2 from front panel 10-1.
49. Unscrew the screws on part 10-3, and then remove part 10-3 from front panel 10-2.
50. Remove shielding finger 10-4 from front panel 10-1.
51. Remove film 10-5 from front panel 10-1.
52. Unscrew the screws on part 16-2, and then remove part1 16-2 from net blank panel16-1.
53. Remove shielding finger 16-3 from net blank panel 16-1.
54. Remove film 16-4 from net blank panel 16-1.
55. Unscrew the screws on part 17-2, and then remove part 17-2 from flue panel A 17-1.
56. Remove shielding finger 17-3 from flue panel A 17-1.
57. Unscrew the screws on part 18-2, and then remove part 18-2 from flue panel B 18-1.
58. Remove shielding finger 18-3 from flue panel B 18-1.
59. Unscrew the screws on part 18-2, and then remove part 19-2 from flue panel C 19-1.
60. Remove shielding finger 19-3 from flue panel C 19-1.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Figure 1 Treatments to the product (front view) Figure 2 Treatments to the product (rear view)
EL-MF877-00 Page 3
Template Revision B