Description; Area Of Application - Siemens SIMOTICS XP 1MB5 Operating Instructions Manual

Description

3.1

Area of application

The rotating electrical motors of this series are used as industrial drives. They are designed for
a wide range of drive applications both for line operation as well as in conjunction with
frequency converters.
They are characterized by their high power density, extreme robustness, long service life and
outstanding reliability.
Machines of this series are low-voltage three-phase induction drives with a cylindrical shaft
extension and keyway.
CE - European Low-Voltage Directive
Machines without CE marking are intended for operation outside the European Economic
Area (EEA). Within the EEA, only use machines with CE marking.
UKCA - United Kingdom Conformity Assessed
In England, Wales and Scotland, only use machines with UKCA marking.
Type of protection Ex ec
This machine has type of protection Ex ec according to IEC / EN 60079-7. This machine is suitable
for operation in zone 2 hazardous areas according to IEC / EN 60079‑10-1.
Explosion hazard
This machine is not designed for use in areas at risk of dust explosion or in areas where an
explosion hazard exists due to hybrid mixtures. An explosion can occur if the machine is
operated in these areas. This can result in death, serious injury or material damage.
• Never operate this machine in the presence of explosive dust or in areas where an explosion
1MB5 shaft height 400/450
Operating Instructions, 04/2023, A5E52802354A
WARNING
hazard exists due to hybrid mixtures.
3
25