Advertisement
Wireless connection with your computer
1. Verify that your Windows
2. Right-click on the Windows Wireless Connection Manager (
in the system tray and choose the "dynadockWiAC_XXXXX".
3. When prompted for a password, press the WPS (Wi-Fi
Protective Setup) button on the top of the unit to populate the
password.
NOTE: If the WPS connection is unsuccessful, you can enter in the
password manually (printed on the label on the underside of
the Product).
The dynadock docking station is now connected wirelessly and
can be used as a Wireless Access Point (WAP).
Docking station setup
1. Connect the monitor cables to the
HDMI/DisplayPort and the USB devices
to the docking station.
2. Go to http://dynadock.com and
download the latest drivers and utility.
3. After software and drivers are installed,
proceed to the next steps to use the
docking station features.
4. In the Windows task tray, right-click on the dynadock
WiAC icon (
NOTE: The undock/dock icons are displayed in one of two colors,
depending on the docking status. The Undocked status
is indicated by the grey icon, and the Docked status is
indicated by the blue icon.
®
).
5. Select dock or undock to dock/undock
wirelessly with the monitor(s) and USB
devices attached to the dynadock wireless
docking station.
computer is powered on.
Download & install
drivers from
dynadock.com
)
Advertisement
