Advertisement
*Item 2 inserts into item 1
**Do not disassemble.
To register your new Mag® flashlight visit our website at www.maglite.com, from our home page just go to "Register Your Maglite®". To view the entire product line click on "Products". Please review all the information contained in this pamphlet.
Large end of battery spring must be snapped into tailcap. Always install batteries with the "+" end facing the head end of the flashlight and the "-" end facing the tailcap end of the flashlight. Switch - Push button switch. Flood to Spot - Rotate head of flashlight to adjust from a wide flood beam to an intense spotlight.
As the chart below shows, your MAGLITE® LED flashlight is capable of five different functions – Full Power, Low Power, Strobe (flashes 12 times per second), Eco and Momentary On/Off (stays on only while the switch button is held down). Not all of these functions are equally important to every user. That is why these functions are organized into four different function sets – so that you can personalize your flashlight to suit your needs, configuring it for quickest access to the functions that best match your preference.
The available function sets, and the functions within each one, are shown in the following table:
Function Sets Chart
As it comes out of the package, your MAGLITE® LED flashlight is set to the "Standard" function set (Function Set #1 in the chart). If you require only those three functions (Full Power, Low Power and Eco), then you never have to change it. You can select a function within that set by the "Quick Click" method: Turn the flashlight on with one Quick Click and it is on at Full Power. Turn it off, then turn it on with two Quick Clicks (about as fast as you would say "Click Click") and it turns on at – the Low Power function. Turn it off, then turn it on with three Quick Clicks (about as fast as you would say "Click Click Click") and you have the Eco function.
Selecting a function within any of the other function sets works the same way –with one, two or three Quick Clicks, as the chart shows. For example, if you are in Function Set #2 and you want to select the Strobe function, begin with the flashlight off, apply three Quick Clicks, and your flashlight will strobe.
Your MAGLITE® LED flashlight's "standard" setting is Function Set #1. If you want to keep that setting you don't have to do anything. Function Set #1 will always be in effect unless it is changed. If you want to choose a different function set, follow these steps:
If flashlight is used less than once a month, remove the batteries between uses. Lubricate all threads and rubber O-rings with petroleum jelly twice yearly. Inspect flashlight monthly and carefully remove any damaged batteries and clean any corrosion.
If flashlight does not turn on or stay on -
Mag Instrument, Inc. warrants to the original owner that this flashlight is free from defects in parts and workmanship for ten years from the date of first retail purchase. Mag or an authorized Mag Warranty Service Center will, free of charge, repair or, at its option, replace a defective flashlight or component. (Mag does not warrant the future availability of particular colors or decorations, and may replace a custom flashlight with a standard flashlight.) This warranty is in lieu of all other warranties, express or implied.
HOW AND WHEN TO MAKE A WARRANTY CLAIM
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the ML100 and is the answer not in the manual?
Questions and answers