Physical Layout; Checking The Optimizer Status - Huawei SUN2000 Series User Manual

SUN2000 Smart PV Optimizer
User Manual

4.5 Physical Layout

The physical layout must be configured for optimizers. When an optimizer is
faulty, it can be quickly located and replaced based on the physical layout.
Physical layouts of the SUN2000 Smart PV Optimizers can be created in three
ways. For details, see
●
●
●

4.6 Checking the Optimizer Status

Step 1 Open the FusionSolar app, enter intl.fusionsolar.huawei.com in Login setting,
log in as an installer, choose Me > Commission Device, and connect to the WLAN
hotspot of the inverter.
Step 2 Log in to the device commissioning screen of the inverter as an installer, choose
Device Monitoring, select a string, and view the optimizer status.
Figure 4-11 Optimizer status
Status
Green
Gray
Red
Yellow
----End
Issue 04 (2023-04-21)
FusionSolar Physical Layout User
Create a physical layout on the FusionSolar app.
Create a physical layout on the WebUI of the FusionSolar Smart PV
Management System (SmartPVMS).
Create a physical layout on the local device commissioning screen.
NO TE
● If Smart PV Optimizers are configured for PV strings, ensure that the Smart PV
Optimizers have been successfully connected to the inverter before performing other
operations.
● Check that the SN labels of Smart PV Optimizers are correctly attached to the physical
layout template.
● Take and save a photo of the physical layout template. Keep your phone parallel to the
template and take a photo in landscape mode. Ensure that the four positioning points
at the corners are in the frame and that each QR code is attached within the frame.
Description
The optimizer is running properly.
The optimizer is offline. Check whether the SN and location
information is correct and search for the device again.
The optimizer is faulty.
The optimizer is disconnected.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Commissioning
Manual.
31