Pinning Information; Pinning - Philips PDIUSBD12 Product Data

Philips Semiconductors

3. Pinning information

3.1 Pinning

9397 750 09238
Product data
Double buffering scheme for main endpoint increases throughput and eases
real-time data transfer
Data transfer rates: 1 Mbytes/s achievable in Bulk mode, 1 Mbits/s achievable in
Isochronous mode
Bus-powered capability with very good EMI performance
Controllable LazyClock output during suspend
Software controllable connection to the USB bus (SoftConnect™)
Good USB connection indicator that blinks with traffic (GoodLink™)
Programmable clock frequency output
Complies with the ACPI, OnNOW and USB power management requirements
Internal Power-on reset and low-voltage reset circuit
Available in SO28 and TSSOP28 pin packages
Full industrial grade operation from −40 to +85 °C
Higher than 8 kV in-circuit ESD protection lowers cost of extra components
Full-scan design with high fault coverage (>99%) ensures high quality
Operation with dual voltages:
3.3 ±0.3 V or extended 5 V supply range of 4.0 to 5.5 V
Multiple interrupt modes to facilitate both bulk and isochronous transfers.
Fig 1. Pin configuration.
Rev. 08 — 20 December 2001
PDIUSBD12
USB interface device with parallel bus
© Koninklijke Philips Electronics N.V. 2001. All rights reserved.
2 of 35