Sealey APWMW01 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instructions gloves
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using this product.
‰
Locate in a suitable area where it will not be an obstruction.
9
Keep the general area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Mount on a flat and solid wall such as breeze block that is strong enough to hold the weight of the workbench and
‰
anything placed upon/within it.
A generic fixing kit has been supplied but please ensure only fittings suitable for the type of wall this unit is mounted to are used.
9
DO NOT attempt to wall mount the workbench on your own. Obtain assistance or use manual handling equipment.
8
Wall mount the workbench at such a height that minimises the risk of injury when used.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use the workbench for any purpose other than that for which it is designed.
8
DO NOT site the workbench out of doors.
8
DO NOT get the workbench wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the workbench with any solvents or abrasives which may damage the coated surface.
8
DO NOT overload the workbench.
8
Ensure that the workbench is properly and firmly assembled and installed before loading it.
9
2. INTRODUCTION
Wall mounted foldable workbench ideal for garages and workshops where space is at a premium. Heavy-duty hammered metal workbench with
100kg capacity. Supplied with 600mm wall mount bracket and hardware pack. Back panel pegboard design compatible with Sealey TTS Hooks
with a 10cm deep gap for tool storage. Lockable design for added security of contents within. Also features two cable and plug grommet holes
either side for corded tools or powerbar. Overall size: 914 x 620 x 560mm.
3. SPECIFICATION
Model No.: ...........................................................APWMW01
Overall Size (W x D x H):
Overall Size Open: ..................................914 x 620 x 560mm
Overall Size Closed: .................................914 x 80 x 560mm
Workbench Size: .......................................914 x 470 x 30mm
4. CONTENTS
© Jack Sealey Limited
900MM/1100MM WALL MOUNTED FOLDABLE
WORKBENCHES
APWMW01, APWMW02
MODEL NO'S:
Model No.: ...........................................................APWMW02
Overall Size (W x D x H):
Overall Size Open: ................................ 1100 x 670 x 610mm
Overall Size Closed: ............................... 1100 x 80 x 610mm
Workbench Size: ..................................... 1100 x 520 x 30mm
Original Language Version
APWMW01, APWMW02 Issue 1 16/11/22