TEMPLE & WEBSTER GLCBAA Assembly Instructions

Read these instructions and follow steps carefully to ensure you assemble the
product correctly and avoid damages. Check that all parts and
hardware have been provided before assembling the product. Place all
contents on a clean, soft-flat surface to avoid scratching the product.
CAUTION:
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all
hardware.
To prevent damage to threads, do not use a power tool and do not overtighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll onto legs.
Keep all hardware and small parts away from children.
STEP 1: Attach both leg (B) to base (C). Install washers (2) and lock nuts (3) on each bolt of
the legs as shown below. Use wrench (6) to secure.
ITEM DESCRIPTION
A
B
C
D
E
C
6
3
B
ASSEMBLY INSTRUCTIONS
GLCBAA
PART LIST
QTY
BACK 1PC
LEG 2PC
BASE 1PC
BACK CUSHION 1PC
BASE CUSHION 1PC
STEP 2: Attach back (A) to base (C). Insert nuts (1) into base (C). Then insert bolt (1)
through back (A) into base (C) as shown below. Tighten with allen key (7).
2
NUT
HARDWARE LIST
ITEM DESCRIPTION
1
BOLT M6X120
2
WASHERS
3
LOCK NUT
4
SCREW M4X15
5
BRACKET
6
KEY
7
ALLEN KEY
8
SCREWDRIVER
7
1
QTY
2PCS
4PCS
4PCS
16PCS
4PCS
1PC
2PCS
1PC
A
C