Panasonic WORKIO DP-CL21 Maintenance And Specifications page 69

Settings and Printing
! Printer Error Messages (Call Service)
Some Operation errors cause the ERROR indicator to blink and printing to stop. A message will be
displayed on the LCD panel until the problem is fixed. If the LCD panel message includes the
instruction, Call for Service, contact an authorized service representative.
In addition, if the following conditions occur, turn off and unplug the printer from the outlet and contact a
qualified service representative:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled into the printer.
• The printer has been exposed to rain or water.
• The printer does not operate normally though the operating instructions are being followed. Adjust
only those controls that are described in the operating instructions; improper adjustment of other
described in the operating instructions; improper adjustment of other controls may result in damage
and will often require extensive work to restore the printer to normal operation.
Maintenance and Spec.
Maintenance and Spec.
Network
Warning / Printer Error Messages
69