Panasonic WORKIO DP-CL21 Maintenance And Specifications page 28

Settings and Printing
Trouble
READY indicator is
blinking.
READY indicator is off.
ERROR indicator is on.
ERROR indicator is
blinking.
On the Test Print, a
single color is not
uniform or many vertical
streaks (both light and
dark) of slightly different
density and non-uniform
color.
Maintenance and Spec.
Maintenance and Spec.
Possible Cause
The printer is receiving,
processing or printing job.
You have entered the Menu mode
in the printer panel.
The printer is not ready, is
disabled, or has detected an error.
Error occurred that is not user-
correctable.
The printer has stopped because it
detected a user-correctable error
such as an open door or a media
jam.
The toner is almost depleted.
The print cartridge is damaged.
Network
Troubleshooting
Corrective Action
Wait for the job to be completed or
cancel the job.
Exit the Menu mode by pressing
the MENU/EXIT (PAUSE) button.
Read the printer panel message to
determine the printer status.
Turn the printer off and back on
again. If the indicator is still on, the
printer requires service.
Correct the condition displayed on
the printer panel (e.g., close the
door or clear the media jam).
Replace the toner cartridge.
Replace the print cartridge.
28