Table of Contents
Advertisement
Available languages
Available languages
Indice
Introduzione ............................334
Uso conforme ...........................334
Descrizione generale ................334
Contenuto .................................... 334
Panoramica .................................. 334
Descrizione del funzionamento ....... 335
Dati tecnici ...............................335
Tempi di caricamento .................... 336
Avvertenze di sicurezza ...........336
Simboli e icone ............................. 336
Indicazioni generali di sicurezza .... 338
Rischi residui ................................ 343
Messa in funzione ....................343
carica .......................................... 344
nstallare il cavo di delimitazione ..... 344
all'alimentatore ............................. 345
stazione di carica ......................... 346
Fissare la stazione di carica ........... 346
Inserire/sostituire la batteria ........... 346
Funzionamento ........................346
Prima messa in funzione ................ 346
Impostazione della lingua .............. 347
Accensione e spegnimento ............. 347
Falciatura .................................348
Falciatura manuale ........................ 348
Programmazione falciatura............. 348
Tornare alla stazione di carica ........ 349
Impostazioni ............................349
Menu sul display ........................... 350
sul display .................................... 351
a punto fi sso ................................. 354
Impostare data e ora ..................... 355
Impostare il sensore di pioggia ....... 355
Impostare le ore di lavoro .............. 356
Modifi care PIN ............................. 356
programmazione .......................... 357
Impostare aree secondarie ............. 357
fabbrica ....................................... 358
errori ........................................... 358
fi rmware ...................................... 358
Processo di carica ....................358
Caricare la batteria ....................... 359
batteria ........................................ 359
Avvertenze per l'utilizzo ..........359
lavoro a mano .............................. 360
l'app Lidl Home ........................360
Funzioni dell'app .......................... 361
Direttiva sulla protezione dei dati .... 363
dati dall'app ................................ 363
Problemi con l'app? - FAQ .............. 363
conservazione ..........................363
manutenzione generali .................. 363
Girare/sostituire la lama ................ 364
Rimozione delle cause di blocco ..... 364
Conservazione .........................364
Conservazione invernale ............... 364
Trasporto...................................... 364
dell'ambiente ...........................365
Pezzi di ricambio/accessori ......365
Ricerca dei guasti .....................366
Garanzia .................................367
Servizio di riparazione .............368
Service-Center ..........................368
Importatore .............................368
conformità CE originale ............450
IT
MT
...................... 361
®
333
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the PMRDA 20-Li A1 and is the answer not in the manual?
Questions and answers
Üdvözlöm Power locked 371 mi a teendö ? Köszönöm4
If the Parkside PMRDA 20-Li A1 power is locked, open the cover and unlock the display using the 4-digit PIN code (default is “1111”).
This answer is automatically generated
Good afternoon I hope you doing good, i have Robot Parkside but i forgot the pasward if you can help me how to reset the password
To reset the password (PIN) for the Parkside Robot PMRDA 20-Li A1, follow these steps:
1. Open the cover if necessary.
2. Unlock the display using the 4-digit PIN (default is "1111").
3. Press the OK button to enter the main menu.
4. Use the arrow buttons to select "Settings" and confirm with OK.
5. Select "Change PIN" and confirm with OK.
6. Enter the old 4-digit PIN. If incorrect, use the back button to retry.
If you forgot the old PIN, the manual does not provide a reset method. You may need to check the manufacturer's support.
This answer is automatically generated
Il tosaerba si blocca come se fosse incastrato
The Parkside PMRDA 20-Li A1 lawn mower may get stuck as if it is jammed due to a blocked cutting motor. This can be caused by foreign objects or faults in the blades. To resolve this issue, check for any obstructions or damage to the blades and remove any debris. If the problem persists, refer to the error troubleshooting section or contact the manufacturer.
This answer is automatically generated
Its showing "loop signal lost" and i have check the cable but its ok
"Loop signal lost" for the Parkside PMRDA 20-Li A1 means the mower is not receiving a signal from the boundary wire. This can happen if the wire is not installed correctly or is damaged.
To fix it:
1. Check the correct installation of the boundary wire.
2. Repair or reinstall the wire if needed.
3. Place the mower inside the boundary area.
4. Restart the mower.
This answer is automatically generated
Why is battery not charging?
The Parkside PMRDA 20-Li A1 battery may not be charging due to the following reasons:
1. Low battery voltage: The battery may not meet the required minimum charge level (70% for automatic mowing, 30% for spot mode).
2. Poor contact between the charging station and the mower: Check for correct contact and restart the device in the charging station.
3. Charging current too low: Check the power supply.
4. No signal from the boundary line: Ensure the boundary line is correctly installed.
5. Mechanical or electrical damage: Do not open the battery or charger; seek professional service.
6. Wet or dirty charger: Keep the charger clean and dry; do not use it outdoors.
This answer is automatically generated
HII cannot restart my mower after the winter break . The battery is charged to 100% but thee lcd screen is unresponsive
The LCD screen of the Parkside PMRDA 20-Li A1 mower may be unresponsive after winter despite a fully charged battery because the display may be locked. Unlocking the display using the 4-digit PIN (factory setting "1111") may be required to access functions and read information.
This answer is automatically generated
Kde najdu tlačítko reset na robotické sekačce smart
The reset function for the Parkside PMRDA 20-Li A1 robotic lawn mower is accessed through the menu, not a physical reset button. To reset to factory settings:
1. Open the cover.
2. Unlock the display using the 4-digit PIN (default is "1111").
3. Press the OK button to enter the main menu.
4. Use the arrow buttons to select "Settings".
5. Select "Factory Settings".
6. Confirm with OK.
The mower will then reset to factory settings.
This answer is automatically generated
I have a narrow path (minimum 20cm) with walls between areas of my lawn will this present a problem?
How to change the PIN?