Panasonic Toughbook CF-U1AQB1G2M Operating Instructions Manual page 45

Display
<Only for model
with GPS>
The cursor cannot
be controlled prop-
erly.
Touchscreen
The cursor does not
work.
Cannot input using
the touchscreen.
Cannot point the
correct position
using the included
stylus.
Operate the following steps.
A Set [GPS] to [Disabled] in the [Advanced] - [Serial Port
Confi guration] of the Setup Utility.
B Press +
tion message, and press
The computer will restart.
C Log on to Windows as an administrator.
D Click (Start) and input "c:\util\drivers\gps\GPSVista.
reg" in [Start Search], and press
E Click [Yes] and click [OK].
The computer will restart.
F Press +
boot screen is displayed.
G Set [GPS] to [Enabled] in the [Advanced] - [Serial Port
Confi guration].
H Press +
tion message, and press
*9
For Numeric keyboard model, select [Load Default Value]
in [Exit] menu by using
or connect a USB keyboard and press
*10
For Numeric keyboard model, connect a USB keyboard
and press .
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
Pr
ess (Windows) and press
to select [Restart] and press
Press
(Windows)
If the computer does not respond to keyboard commands,
read "No response." (
Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main]
menu of the Setup Utility.
Perform the touchscreen calibration (
*9
(F10) and select [Yes] at the confi rma-
(Enter).
*10
(F2) or + (Del) while [Panasonic]
*9
(F10) and select [Yes] at the confi rma-
(Enter).
and press
three times, and press
(Enter).
, and to select [Restart].
page 46).
(Enter) .
(Enter),
.
page 30).
45