Panasonic Toughbook CF-U1AQB1G2M Operating Instructions Manual page 41

Starting Up
The date and time
are incorrect.
[Executing Battery
Recalibration]
screen appears.
[Enter Password]
does not appear
when resuming from
sleep (
/standby
( ) or
hibernation.
Make the correct settings.
Click (Start) - [Control Panel] - [Clock, Language, and
Region] - [Date and Time].
Click [start] - [Control Panel] - [Date, Time, Language, and
Regional Options] - [Date and Time].
If the problem persists, the internal clock battery may need
to be replaced. Contact Panasonic Technical Support.
When the computer is connected to LAN, check the date
and time of the server.
The 2100 A.D. or later year will not be correctly recognized
on this computer.
The Battery Recalibration was canceled before Windows
was shut down last time. To start up Windows, turn off the
computer by the power switch, and then turn on.
The password you have set in the Setup Utility is not
requested at resuming. To use the password security at
)
resuming, set the Windows password.
A Click
accounts] and select the account, and set the pass-
word.
B Click
tenance] - [Require a password when the computer
wakes] and add a check mark for [Require a pass-
word].
Set the Windows password. The password you have set in
the Setup Utility is not requested at resuming.
A Click [start] - [Control Panel] - [User Accounts] and
select the account, and set the password.
B Click [start] - [Control Panel] - [Performance and Main-
tenance] - [Power Options] - [Advanced] and add a
check mark for [Prompt for password when computer
resumes from standby].
(Start) - [Control Panel] - [Add or remove user
(Start) - [Control Panel] - [System and Main-
41