Wireless Communication; Connecting Peripherals - Panasonic Toughbook CF-U1A1B1G2M Reference Manual

Troubleshooting (Advanced)
Keyboard
Cannot enter special characters (ß, à,
ç, etc.) and symbols.
Network
Cannot connect to network.
Cannot check the computer's MAC
address.
Wireless Communication (only for model with wireless LAN/Bluetooth/wireless
WAN)
Cannot connect to a network.
Access point is not detected.

Connecting Peripherals

An error occurs while installing the
driver.
Use the character map. Click [start] - [All Programs] - [Accessories] - [System
Tools] - [Character Map].
Set LAN ( page 77).
Follow the steps below.
Click [start] - [All Programs] - [Accessories] - [Command Prompt].
A
Input [ipconfig/all], and press
B
Write down the 12-digit string of alphanumeric displayed in the
C
[Physical Address] line of the LAN or the wireless LAN (only for model
with wireless LAN).
Input [exit], and press
D
Slide the wireless switch to turn on the wireless devices.
Set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled] in
the [Advanced] menu of the Setup Utility (
Restart the computer.
Confirm that / /
If / / is not displayed on the notification area, turn on the wireless
communication ( page 78).
When you install a driver of card or peripheral device, make sure that the driver
is compatible with the operating system. If it is not compatible, malfunction may
occur. For information about the driver, contact the manufacturer of the
peripheral device.
(Enter).
(Enter).
page 88).
is displayed on the notification area.
103