Samsung OfficeServ DS-5021D User Manual page 61

Automatic Hold
With Automatic Hold set, when you are answering an outside call, pressing the trunk line
or flashing Call button will automatically put your outside call on hold and connect you to
the next call. You can set Automatic hold on your phone by following the procedure below.
NOTE
Intercom calls will be placed on hold by pressing the [Hold] or [Transfer] button. If you press
another trunk line button or flashing Call button while you are on an intercom call, the intercom
will be disconnected.
© SAMSUNG Electronics Co., Ltd.
1 Press the [Transfer] button.
2 Press [1] [1] [0].
► ►
3 To use this function, press [0]
function is not required, press [0]
4 Press the [Transfer] button to save the selected item.
[0] [1], and if this
► ►
[0] [0].
► ►
59