Table of Contents
Advertisement
PRIN TER SECTIO N
If
Picture data cannot
be transmitted
through the D V
connection
Picture blurred
when printed from
the camcorder with
the D V connector
Picture data cannot
be transmitted
through IrD A
reception
Downloaded from:
Check to see if
Printer is in DV mode.
Press IrDA/DV button to light the DV lamp.
Cable is in correct connection.
Make sure of proper connection.
Picture is recorded on the DV tape.
Use a tape with picture data recorded.
Camcorder with the DV connector is in Still
Picture mode.
When installing a picture from the camcorder by
the DV connector to the printer, set the camcorder
with the DV connector in Still Picture.
Printer is in IrDA mode.
Press IrDA/DV button to light the IrDA lamp.
Picture data is being transmitted at a correct
distance and angle.
Aim the transmitter right in front of the IrDA sensor
of printer and transmit within an approx. 50 cm
distance. Data communications may be difficult at
a too close or too remote distance depending on
the machines in use.
https://www.usersmanualguide.com/
39
EN
Reference
pa ges
10
16
16
11
18
Advertisement
Table of Contents
