Setting The Password - Panasonic Toughbook CF-08TX1A1M Operating Instructions Manual

First-time Operation
You can set two types of users with different operating authorities.
Supervisor
Changes settings related to the wire-
less display operations, and controls
the operations of the User.
The security setting screen can be displayed using the following procedure.
A Double-tap
B Double-tap [Security (Supervisor)].
[Supervisor] tab
Settings for the Supervi-
sor
Here, we will explain the settings made by the Supervisor for the Supervisor and User.

Setting the password

First, set the Supervisor Password using the following procedure.
A Tap the [Supervisor] tab.
B Enter your password in [New Password].
C Enter your password again in [Confirm Password] and tap
D At the confirmation message, tap [Yes].
When the message that recommends executing Flash Backup appears, tap
Next, set the User Password using the following procedure.
A Tap the [User] tab.
B Set the password.
Refer to step B-D of the Supervisor Password setting. (
CAUTION
Do not forget your password. If you forget your Supervisor Password, you will
not be able to use your wireless display. Contact your technical support office.
24
User
Executes only operations that have
been limited by the Supervisor.
on the desktop.
[User] tab
Settings for the User
[Device Permission] tab
Settings for the Supervi-
sor and User
.
above)
.