Panasonic Toughbook CF-08TX1A1M Operating Instructions Manual page 21

6 Make the network setting.
Before making the settings for the wireless display, check the following server set-
tings.
Is the remote desktop allowed to use?
IP address and subnet mask (if the name server is inside the network, use the
server name instead.)
User name and password
When making connections with a LAN
For the following operation, make
sure the LAN is enabled.
Tap [ETHERNET1], and then tap
[File] - [Enable].
The icon will change from
.
A Double-tap [ETHERNET1].
B Tap the [IP address] tab, and set an IP address and subnet mask.
If DHCP is available on the network
Select [Obtain an IP address via
DHCP].
C Tap [OK].
When making connections with a wireless LAN
A Double-tap
B Tap the [Wireless Information] tab, and then tap the access point from the
list.
Now, select settings as follows according to your own network environ-
ment.
C Tap [Connect].
When making connections with a wire-
less LAN
to
A Double-tap [WIRELESS LAN1].
If DHCP is not available on the network
Select [Specify an IP address], and
enter the IP address, subnet mask and
if necessary, default gateway.
on the desktop, and then tap [Wireless LAN].
21