Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Jetson Light Rider JLRM16-PBK
Summary of Contents for Jetson Light Rider JLRM16-PBK
- Page 1 Light Rider (JLR) 16″ Kids' Light-Up Bicycle. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODELS: JLRM16-PBK | JLRM16-GPU | JLRM16-GTL | JLRM16-PNK | JLRM16-BLU | JLRM16-BBL | JLRM16-BPK | JLRM16-BPU | JLRM16-BGR U.S. Patent No. 11,155,315 Designed in Brooklyn...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 4: Table Of Contents
Contents Safety Warnings ................................4 Warranty Coverage ..............................6 Pre-Ride Safety Checks .............................7 Product Overview ..............................8 Specs & Features ..............................10 Rider Suitability ...............................10 Online Resources ..............................11 1. Getting Started Starting Notes ...............................12 Attaching the Training Wheels ..........................13 Attaching the Front Wheel ...........................17 Installing the Handlebar ............................20 Attaching the Seat... - Page 5 2. Features & Functions Using the Brake ..............................34 Using the Bell ................................35 Using the Lights ..............................36 3. Making Moves Riding Your Jetson Light Rider ..........................38 Helmet Safety ................................39 Care & Maintenance ..............................40...
-
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 • Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death. • If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team. • Replace worn or broken parts immediately.
-
Page 8: Warranty Coverage
ONE-YEAR GENERAL LIMITED WARRANTY All new Jetson products are warranted against defects in materials and workmanship for a period of one year from the date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support). -
Page 9: Pre-Ride Safety Checks
Pre-Ride Safety Checks CONDUCT THESE IMPORTANT SAFETY CHECKS BEFORE EVERY RIDE. BRAKES • CHECK THE BRAKE IS IN GOOD WORKING ORDER. • CHECK THAT THE COASTER BRAKE IS ACTIVATED WHEN THE PEDALS ARE ROTATED BACKWARDS AND THAT THE BRAKE IS IN WORKING ORDER. -
Page 10: Product Overview
Product Overview 1. BIKE FRAME 10. DUST CAPS 2. FRONT WHEEL* 11. CHAIN 3. HANDLEBAR* 12. CHAIN GUARD 4. BELL 13. LED LIGHTS 5. SEAT* 14. LIGHTING POWER AND 6. PEDALS WITH REFLECTORS CONTROL BUTTONS (X2; LEFT AND RIGHT)* 15. REAR WHEEL 7. - Page 11 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 12: Specs & Features
Specs & Features • PRODUCT DIMENSIONS: 47″ × 21″ × 28.5″ • HANDLEBAR HEIGHT: 26.3″ - 28.7″ • SEAT HEIGHT: 21.4″ - 25″ • PRODUCT WEIGHT: 22 LBS • TIRE SIZE: 16 IN • BRAKE TYPE: COASTER BRAKE • WEIGHT LIMIT: 110 LBS •... -
Page 13: Online Resources
Online Resources Scan for our most updated Jetson Light Rider onboarding materials and support resources. -
Page 14: Getting Started
STEM, ON THE SEAT CLAMP AND WHEEL AXLES, ETC. · OUR JETSON LIGHT RIDER 16″ BIKES HAVE EVOLVED OVER THE YEARS, AND THIS USER MANUAL APPLIES TO ALL VERSIONS. CERTAIN NOTES AND INSTRUCTIONS ARE ONLY APPLICABLE TO SOME VERSIONS AND ARE INDICATED AS SUCH. -
Page 15: Attaching The Training Wheels
WASHER 15MM WRENCH AXLE NUT REAR AXLE Attaching the Training Wheels* (*IF NEEDED) YOU WILL NEED THE 15MM WRENCH. 1. LAY THE BIKE FRAME ON ITS SIDE. 2. ON THE SIDE OF THE REAR WHEEL THAT IS FACING REAR WHEEL UPWARDS, LOOSEN AND REMOVE THE AXLE NUT BY TURNING IT COUNTERCLOCKWISE WITH YOUR FINGERS OR THE 15MM WRENCH. - Page 16 CHAIN STAY REAR AXLE TRAINING WHEEL TRAINING WHEEL BRACKET REAR WHEEL 4. SLIDE THE HOLE AT THE TOP OF ONE TRAINING WHEEL BRACKET AROUND THE AXLE AND POSITION THE TRAINING WHEEL SUCH THAT THE FOLLOWING CONDITIONS ARE MET: • THE TRAINING WHEEL BRACKET CURVES OUTWARD—AWAY FROM THE BIKE. •...
- Page 17 WASHER 15MM WRENCH AXLE NUT 5. SLIDE THE WASHER ONTO THE AXLE AND THEN FINGER-TWIST THE AXLE NUT CLOCKWISE ONTO THE AXLE. 6. TIGHTEN THE AXLE NUT WITH THE 15MM WRENCH. 7. FLIP THE BIKE FRAME OVER AND REPEAT STEPS 2 – 6 ON THE OTHER SIDE WITH THE OTHER TRAINING WHEEL.
- Page 18 8. CHECK THAT THE TRAINING WHEELS ARE SECURE.
-
Page 19: Attaching The Front Wheel
FRONT WHEEL AXLE NUTS 15MM WRENCH Attaching the Front Wheel YOU WILL NEED THE 15MM WRENCH. 1. LOOSEN AND REMOVE THE AXLE NUTS FROM BOTH SIDES OF THE FRONT WHEEL BY TURNING EACH COUNTERCLOCKWISE WITH YOUR FINGERS OR THE 15MM WRENCH. 2. - Page 20 DIRECTIONAL MARKING ON TIRE FRONT FORK AXLE WASHER WASHER HOOK HOLE 4. LIFT THE BIKE UPRIGHT AND ROTATE THE FRONT FORK SO THAT ONE FORK LEG IS ON THE LEFT SIDE AND ONE FORK LEG IS ON THE RIGHT SIDE OF THE BIKE. 5.
- Page 21 15MM WRENCH AXLE NUT 8. FINGER-TWIST AN AXLE NUT CLOCKWISE ONTO EACH SIDE OF THE AXLE. 9. TIGHTEN THE AXLE NUTS WITH THE 15MM WRENCH. 10. CHECK THAT THE WHEEL IS SECURE AND SPINS FREELY IN THE FORK. IMPORTANT: AN UNSECURED WHEEL CAN LOOSEN OR FALL OFF, PUTTING THE RIDER AT RISK OF SERIOUS INJURY. ENSURE THAT THE AXLE IS SECURE IN THE FORK AND THAT THE AXLE NUTS ARE TIGHT.
-
Page 22: Installing The Handlebar
Installing the Handlebar YOU WILL NEED THE 13MM WRENCH. 1. LOOSEN THE CAP BOLT ON THE TOP OF THE HANDLEBAR BY TURNING IT COUNTERCLOCKWISE FOR 1-2 ROTATIONS WITH THE 13MM WRENCH. 2. POSITION THE HANDLEBAR ABOVE THE HEAD TUBE WITH THE HANDLEBAR POST IN LINE WITH THE STEM AND THE BELL ON THE RIGHT SIDE OF THE BIKE. - Page 23 4. CHECK THAT THE HANDLEBAR AND FRONT FORK ARE ALIGNED, SUCH THAT WHEN THE WHEEL IS POINTED FORWARD AND THE HANDLEBAR IS STRAIGHT ACROSS THE BIKE. IF NECESSARY, MAKE ROTATIONAL ADJUSTMENTS ON EITHER THE HANDLEBAR OR THE FORK UNTIL BOTH PIECES ARE STRAIGHT AND ALIGNED. 5.
- Page 24 6. TIGHTEN THE CAP NUT BY TURNING IT CLOCKWISE WITH THE WRENCH. 7. CHECK THAT THE HANDLEBAR IS SECURE AND THAT THE FRONT WHEEL TURNS LEFT OR RIGHT IN ACCORDANCE WITH THE ROTATION OF THE HANDLEBAR. 13MM WRENCH CAP NUT...
-
Page 25: Attaching The Seat
Attaching the Seat 1. PULL OPEN THE LATCH ON THE SEAT CLAMP. 2. LOCATE THE "MINIMUM INSERTION" MARK ENGRAVED NEAR THE BOTTOM OF THE SEAT POST. LOWER THE SEAT POST THROUGH THE CLAMP AND INTO THE SEAT TUBE. (IF THE CLAMP OPENING IS TOO NARROW TO RECEIVE THE POST, YOU CAN WIDEN IT BY TURNING THE KNOB COUNTERCLOCKWISE WHILE HOLDING THE LATCH STEADY.) 3. - Page 26 4. CLOSE THE LATCH ON THE SEAT CLAMP. SEAT CLAMP LATCH...
- Page 27 5. CHECK THAT THE SEAT IS SECURE: USE YOUR HAND TO PUT DOWNWARD PRESSURE ON THE SEAT. IF THE SEAT POST SLIPS FURTHER DOWN INTO THE TUBE, BRING IT BACK TO POSITION AND TIGHTEN THE CLAMP BY TURNING THE KNOB CLOCKWISE.
-
Page 28: Attaching The Pedals
CRANK ARM SPINDLE RIGHT ("R") PEDAL Attaching the Pedals YOU WILL NEED THE 15MM WRENCH. 1. NOTE THE "R" AND "L" MARKINGS ON THE END OF SPINDLE OF EACH PEDAL, INDICATING "RIGHT" AND "LEFT." 2. ALIGN THE SPINDLE ON "R" PEDAL WITH THE HOLE AT THE END OF THE CRANK ARM ON THE SIDE OF THE BIKE WHERE YOU WILL PEDAL WITH YOUR RIGHT FOOT. - Page 29 15MM WRENCH 4. FINISH INSERTING AND THEN TIGHTENING THE PEDAL INTO THE CRANK ARM BY TURNING IT CLOCKWISE WITH THE 15MM WRENCH. CHECK THAT THE RIGHT PEDAL IS SECURE. 5. REPEAT STEPS 2-4 WITH THE LEFT ("L") PEDAL. IMPORTANT: THE SPINDLE ON THIS PEDAL IS REVERSE THREADED AND NEEDS TO BE INSERTED AND TIGHTENED WITH COUNTERCLOCKWISE TURNS.
-
Page 30: Inflating The Tires
TIRE VALVE TIRE VALVE LIGHT DUST CAP (DEPENDENT ON MODEL) Inflating the Tires BEFORE YOUR FIRST RIDE, YOU WILL NEED TO ADD AIR TO YOUR TIRES TO BRING THEM TO THE RECOMMENDED PRESSURE OF 36 PSI (POUNDS PER SQUARE INCH). USE A GAUGE TO CHECK THAT THE TIRE PRESSURE IS AT OR AROUND 36 PSI PRIOR TO EVERY RIDE. - Page 31 TIRE VALVE STEM EXTENSION HOSE (SOME MODELS) 2. FOLLOW THE MANUFACTURE'S INSTRUCTIONS ON YOUR AIR PUMP TO INSERT AIR INTO THE TIRE. CHECK PERIODICALLY WITH A GAUGE AND CONTINUE ADDING AIR UNTIL YOU REACH 36 PSI. • TO USE THE TIRE VALVE STEM EXTENSION HOSE (INCLUDED WITH SOME MODELS): FINGER TWIST THE LARGER END OF THE HOSE ONTO THE TIRE VALVE, AND THEN ATTACH YOUR AIR PUMP INTO THE OTHER END OF THE HOSE.
- Page 32 TIRE VALVE TIRE VALVE LIGHT DUST CAP (DEPENDENT ON MODEL) 4. FINGER-TWIST THE DUST CAP OR TIRE VALVE LIGHT (DEPENDENT ON YOUR MODEL) ONTO THE VALVE. 5. REPEAT WITH THE OTHER TIRE.
-
Page 33: Inserting & Changing The Batteries
3 AA BATTERIES BATTERY COMPARTMENT Inserting & Changing the Batteries BATTERIES FOR MAIN FRAME LIGHTS (ALL MODELS) YOU WILL NEED 3 AA BATTERIES (NOT INCLUDED). 1. TO UNLOCK THE BATTERY COMPARTMENT, GENTLY PUSH THE END OF IT AND TURN IT COUNTERCLOCKWISE. 2. - Page 34 4. SLIDE THE COMPARTMENT BACK INTO THE FRAME. 5. GENTLY PUSH THE COMPARTMENT IN AND TURN IT CLOCKWISE TO LOCK IT INTO THE FRAME.
- Page 35 BATTERIES FOR TIRE VALVE LIGHTS (SOME MODELS) EACH VALVE LIGHT REQUIRES 3 AG10 1.5V BATTERIES (INCLUDED). PRIOR TO FIRST USE, A PROTECTIVE PACKAGING PIECE MUST BE REMOVED FROM INSIDE THE BATTERY COMPARTMENT. 1. REMOVE THE VALVE CONNECTOR FROM THE LIGHT SECTION BY FINGER-TWISTING IT OFF COUNTERCLOCKWISE. 2.
-
Page 36: Features & Functions
COASTER BRAKE 2. Features & Functions Using the Brake THE COASTER BRAKE IS ON THE REAR WHEEL. TO ENGAGE THE COASTER BRAKE, PEDAL BACKWARDS TO SLOW DOWN. A QUICKER REVERSE PEDALING ACTION WILL BRING YOU TO A COMPLETE STOP. -
Page 37: Using The Bell
Using the Bell USE THE BELL AS AN ALERT TO OTHER RIDERS AND PEDESTRIANS. TO SOUND THE BELL, FLICK DOWN ON THE BELL TAB QUICKLY AND FORCEFULLY WITH YOUR RIGHT-HAND THUMB. BELL BELL TAB... -
Page 38: Using The Lights
Using the Lights FRAME LIGHTS YOU CAN LIGHT UP YOUR RIDE WITH 4 DIFFERENT LIGHTING PATTERNS AND IN 8 DIFFERENT COLORS (INCLUDING "MULTI"). TO TURN THE LIGHTS ON OR OFF: PRESS AND HOLD THE LIGHTING POWER BUTTON FOR 1-2 SECONDS. TO CHANGE TO ANOTHER LIGHTING PATTERN (4 TOTAL): PRESS AND HOLD THE MODE BUTTON FOR 3-4 SECONDS. - Page 39 TRAINING WHEEL TIRE VALVE LIGHT IMPORTANT: ALWAYS REMEMBER TO TURN YOUR LIGHTS OFF AFTER A RIDE. NOTE: TO PRESERVE BATTERY POWER, THE LIGHTS WILL AUTOMATICALLY TURN OFF 10 MINUTES AFTER THEY HAVE BEEN POWERED ON. TO TURN THE LIGHTS BACK ON AND RE-SET THEM TO YOUR DESIRED PATTERN AND COLOR, FOLLOW THE INSTRUCTIONS ABOVE.
-
Page 40: Making Moves
3. Making Moves Riding Your Jetson Light Rider NOW THAT YOU HAVE YOUR JETSON LIGHT RIDER 16″ SAFELY ASSEMBLED, IT’S TIME TO RIDE OUT AND LIGHT UP THE WORLD. -
Page 41: Helmet Safety
Helmet Safety A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES. PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 42: Care & Maintenance
• Carefully wipe with a damp cloth, then dry with a dry cloth. • Do not apply water directly to the Jetson Light Rider 16". This can cause damage to the frame and electrical systems, which could result in malfunctions that lead to personal injury. - Page 43 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 44 Date Code: 02/2023 Document Edition: v3.0 © 2023, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.
Need help?
Do you have a question about the Light Rider JLRM16-PBK and is the answer not in the manual?
Questions and answers