Jetson JetKart JKAR19-BLK Manual
  1. Manuals
  2. Brands
  3. Jetson Manuals
  4. Bicycle
  5. JKAR19-BLK
  6. Manual

Jetson JetKart JKAR19-BLK Manual

Hoverboard attachment
Hide thumbs Also See for JetKart JKAR19-BLK:
Table of Contents

Advertisement

Quick Links

Download this manual
JetKart
®
Hoverboard Attachment
A guide for your ride.
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
MODEL: JKAR19-BLK
Designed in Brooklyn

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JetKart JKAR19-BLK and is the answer not in the manual?

Questions and answers

Related Manuals for Jetson JetKart JKAR19-BLK

Summary of Contents for Jetson JetKart JKAR19-BLK

  • Page 1 JetKart ® Hoverboard Attachment A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODEL: JKAR19-BLK Designed in Brooklyn...
  • Page 3 Jetson's top two riding rules: Be safe. Have fun!

  • Page 5: Table Of Contents

    Contents Safety Warnings ......................4 What’s in the Box ......................6 Product Specs ..

  • Page 6: Safety Warnings

    Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;...
  • Page 7 • Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death. • If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team. • Replace worn or broken parts immediately.

  • Page 8: What's In The Box

    What’s in the Box 1. REAR FRAME 2. SEAT BASE 3. SEAT BACK 4. HANDLES (×2) 5. ADJUSTABLE BRACKETS (×2, LEFT AND RIGHT) 6. CENTER CONNECTOR 7. FRONT FRAME 8. FOOTREST 9. WHEEL (MOTION-ACTIVATED LED LIGHT-UP) 10. VELCRO STRAP (×2) HARDWARE AND TOOLS INCLUDED: SMALL BOLTS SMALL NUTS...
  • Page 9 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.

  • Page 10: Product Specs

    Product Specs • WEIGHT LIMIT: 250 LBS • PRODUCT WEIGHT: 11.95 LBS • RECOMMENDED AGE: 13+ • WHEEL SIZE: 4” • DIMENSIONS: 37.4 - 44.4” (L) × 37.4” (W) × 11.3 - 13.7” (H)

  • Page 11: Sizing The Jetkart® For Your Hoverboard

    1. Getting Started Sizing the JetKart for your Hoverboard ® IMPORTANT: ENSURE THAT YOUR HOVERBOARD IS POWERED OFF WHEN SIZING UP THE BRACKETS. • THE JETKART®’S HANDLE BRACKETS REST ON THE LEFT AND RIGHT FOOTPADS OF THE HOVERBOARD. THE BRACKET LEGS MUST BE SNUG AROUND THE FRONT AND BACK EDGES OF THE HOVERBOARD SO THAT THE MIDDLE OF THE BRACKETS REST ON THE FOOTPAD SENSORS.
  • Page 12 TO RESIZE THE BRACKETS: 1. REMOVE THE BRACKETS FROM THE HOVERBOARD. 2. LOCATE THE TWO BOLTS GOING THROUGH THE SIDES OF EACH BRACKET; THEY ARE SECURED ON THE OTHER SIDE BY A WASHER AND BOLT. (2 PER BRACKET, 4 TOTAL) 3.
  • Page 13 4. REPEAT WITH THE OTHER 3 BOLT, NUT, AND WASHER COMBOS. 5. SLIDE THE ADJUSTABLE LEG PIECES (A) DOWN OFF OF THE CENTER BRACKET PIECE (B).
  • Page 14 6. REPOSITION THE ADJUSTABLE BRACKET LEGS (A) CLOSER IN OR FURTHER OUT ON THE CENTER BRACKET PIECE (B) TO RESIZE THE BRACKET FOR YOUR HOVERBOARD, AND SLIDE THEM BACK UP ONTO THE BRACKET. 7. REST THE BRACKETS ON THE HOVERBOARD TO SEE IF FURTHER ADJUSTMENTS ARE NECESSARY. 8.
  • Page 15 9. RE-INSERT ONE OF THE BOLTS THROUGH THE HOLES IN THE OVERLAPPING BRACKET PIECES FROM THE SIDE OF THE BRACKET WITH THE HOURGLASS-SHAPED CUT-OUT. 10. SLIP A WASHER AND THEN TWIST A NUT ONTO THE END OF THE BOLT. USE THE ALLEN KEY TIP OF THE TWO-BIT TOOL TO HOLD THE BOLT STEADY WHILE YOU TIGHTEN THE NUT ALL THE WAY ONTO THE BOLT BY TURNING IT CLOCKWISE WITH THE WRENCH.
  • Page 16 11. REPEAT STEPS 6 AND 7 WITH THE OTHER 3 HARDWARE SETS SO THAT ALL FOUR ADJUSTABLE BRACKET LEGS (A) ARE SECURED ON THE CENTER BRACKET PIECE (B).

  • Page 17: Attaching The Handles

    Attaching the Handles 1. INSERT ONE HANDLE INTO THE TUBE EXTENDING DIAGONALLY UPWARDS FROM THE TOP OF ONE HANDLE BRACKET.
  • Page 18 2. ROTATE THE HANDLE IN THE TUBE SO THAT: • THE HANDLE BENDS TOWARDS THE SIDE OF THE BRACKET WITH THE SMALLER, HOURGLASS-SHAPED HOLE. • THE TWO HOLES AT BASE OF THE HANDLE INSIDE THE BRACKET ARE ALIGNED WITH THE TWO HOLES ON THE SIDE OF THE TUBE.
  • Page 19 BOLTS 3. FROM THE SIDE OF THE BRACKET TOWARDS WHICH THE HANDLE BENDS, USE THE SCREWDRIVER-TIP OF THE 2-BIT TOOL TO TWIST ONE OF THE SMALL BOLTS CLOCKWISE INTO THE ALIGNED HOLES OF THE BRACKET TUBE AND THE HANDLE. 4. WHEN THE BOLT IS HALFWAY INSERTED, USE YOUR OTHER HAND TO POSITION A SMALL NUT ON THE OPPOSITE HOLE, WITH THE NARROWER SIDE OF THE NUT FACING IN, READY TO RECEIVE THE BOLT.
  • Page 20 5. HOLD THE NUT STEADY AND CONTINUE TO SCREW THE BOLT THROUGH UNTIL IT IS FULLY INSERTED AND SECURED TIGHTLY IN THE NUT. 6. REPEAT STEPS 1 – 5 WITH THE OTHER BRACKET, HANDLE, BOLT, AND NUT. 7. CHECK THAT BOTH HANDLES ARE SECURE IN THE BRACKETS.

  • Page 21: Attaching The Brackets

    Attaching the Brackets 1. LOCATE THE LARGE HOLES ON BOTH BRACKET UNDERNEATH THE AREA WHERE THE HANDLE HAS BEEN ATTACHED. 2. POSITION ONE BRACKET ON EACH SIDE OF THE SEAT BASE SO THAT • THE HOLE ON EACH BRACKET IS ALIGNED WITH THE FRAME TUBE EXTENDING OUT FROM UNDER THE SIDE OF THE SEAT. •...
  • Page 22 3. SLIDE EACH SIDE OF THE FRAME TUBE INTO THE BRACKETS.
  • Page 23 4. TWIST A LARGE BOLT CLOCKWISE INTO THE HOURGLASS-SHAPED HOLE ON THE EXTERIOR OF EACH BRACKET, OPPOSITE WHERE THE TUBE WAS INSERTED. USE THE WRENCH TO FULLY TIGHTEN THE BOLT INTO EACH BRACKET.
  • Page 24 5. CHECK THAT THE FRAME IS SECURE ON THE BRACKETS.

  • Page 25: Attaching The Seat Back

    Attaching the Seat Back 1. POSITION THE SEAT BACK SO THAT THE PADDING IS FACING THE FRONT OF THE JETKART® AND THE SUPPORT (A) EXTENDING BELOW IT IS ALIGNED WITH THE SUPPORT (B) EXTENDING UP FROM THE BACK OF THE SEAT BASE.
  • Page 26 2. SLIDE THE SEAT BACK SUPPORT (A) ONTO THE BASE SUPPORT (B). CONTINUE SLIDING UNTIL THE HOLE ON THE REAR SIDE OF THE SEAT BACK SUPPORT (A) IS ALIGNED WITH ONE OF TWO SIZING HOLES ON THE REAR SIDE OF THE BASE SUPPORT (B).
  • Page 27 3. INSERT A KNOB INTO THE SET OF ALIGNED HOLES ON THE BACK SIDE OF THE SEAT AND, WHILE APPLYING A SLIGHT PRESSURE ON THE KNOB, TWIST IT CLOCKWISE UNTIL IT IS FULLY INSERTED INTO THE OVERLAPPING FRAME PIECES. 4. TIGHTEN THE KNOB. 5.

  • Page 28: Assembling The Frame

    Assembling the Frame 1. LAY THE CENTER CONNECTOR (B) ON THE GROUND WITH THE LARGER HOLES FACING UP. 2. POSITION THE REAR FRAME (A) ON ONE END OF THE CENTER CONNECTOR (B) SO THAT IT IS IN LINE WITH THE CONNECTOR. 3.
  • Page 29 4. SLIDE THE CENTER CONNECTOR (B) ONTO THE REAR FRAME (A) UNTIL THE HOLE ON TOP OF IT IS ALIGNED WITH ONE OF THE TWO SIZING HOLES IN THE REAR FRAME.
  • Page 30 5. INSERT A KNOB INTO THE SET OF ALIGNED HOLES AND, WHILE APPLYING A SLIGHT DOWNWARD PRESSURE ON THE KNOB, TWIST IT CLOCKWISE IT IS FULLY INSERTED INTO THE OVERLAPPING PIECES.
  • Page 31 6. SLIDE THE CENTER CONNECTOR (B) ONTO THE FRONT FRAME (C) UNTIL THE HOLE ON TOP OF THE CENTER CONNECTOR IS ALIGNED WITH ONE OF THE THREE SIZING HOLES IN THE FRONT FRAME.
  • Page 32 7. INSERT A KNOB INTO THE SET OF ALIGNED HOLES AND, WHILE APPLYING A SLIGHT DOWNWARD PRESSURE ON THE KNOB, TWIST IT CLOCKWISE IT IS FULLY INSERTED INTO THE OVERLAPPING PIECES. 8. CHECK THAT BOTH KNOBS ARE TIGHT AND THE JETKART® FRAME IS SECURE.

  • Page 33: Attaching The Jetkart To Your Hoverboard

    Attaching the JetKart to your Hoverboard ® POWER OFF YOUR HOVERBOARD BEFORE ATTACHING THE JETKART® TO IT. 1. PLACE YOUR JETKART® ON THE GROUND AND PLACE YOUR HOVERBOARD BEHIND IT SO THAT THE HOVERBOARD’S POWER BUTTON IS FACING AWAY FROM THE JETKART®. 2.
  • Page 34 VELCRO STRAP 4. SLIDE A VELCRO STRAP THROUGH THE SLOT ON THE FRONT OF EACH BRACKET. WRAP EACH STRAP UNDER THE HOVERBOARD AND UP THROUGH THE SLOTS ON THE REAR OF THE BRACKETS.
  • Page 35 5. PULL THE STRAPS TIGHT AND FOLD THE ENDS OF THE STRAPS OVER. 6. PRESS THE VELCRO ON EACH FOLDED END OF THE STRAP FIRMLY ONTO THE VELCRO ON THE MIDDLE OF THE STRAP. 7. CHECK THAT THE JETKART® IS SECURELY ATTACHED TO THE HOVERBOARD.

  • Page 36: Adjusting The Length Of The Jetkart

    Adjusting the Length of the JetKart ® THE JETKART® CAN BE SIZED TO SUIT EACH RIDER. WHEN SEATED AND WITH FEET POSITIONED ON THE FOOTREST, A RIDER’S LEGS SHOULD BE BENT AT A SLIGHT ANGLE AT THE KNEE. 1. TWIST ONE OR BOTH KNOBS ON TOP OF THE CENTER CONNECTOR (B) COUNTERCLOCKWISE TO LOOSEN AND REMOVE.
  • Page 37 2. PUSH OR PULL TO SLIDE THE REAR FRAME (A) AND FRONT FRAME (C) IN THE CENTER CONNECTOR UNTIL THE HOLES ON TOP OF THE CENTER CONNECTOR ARE ALIGNED WITH NEW SIZING HOLES ON BOTH PARTS OF THE FRAME.
  • Page 38 3. RE-INSERT EACH REMOVED KNOB INTO THE ALIGNED HOLES. APPLY A SLIGHT DOWNWARD PRESSURE ON THE KNOB AND TWIST CLOCKWISE UNTIL THEY ARE FULLY INSERTED. 4. CHECK THAT THE FRAME IS SECURE.

  • Page 39: Adjusting The Height Of The Seat

    Adjusting the Height of the Seat THE SEAT BACK CAN BE SET AT TWO POSITIONS: HIGH AND LOW. 1. TWIST THE KNOB ON THE REAR SIDE OF THE SEAT BACK SUPPORT COUNTERCLOCKWISE TO LOOSEN AND REMOVE IT. SET ASIDE.
  • Page 40 2. RAISE OR LOWER THE SEAT BACK UNTIL THE HOLE ON THE REAR SIDE OF THE SEAT BACK SUPPORT IS ALIGNED WITH THE OTHER SIZING HOLE ON THE REAR SIDE OF THE SEAT BASE SUPPORT.
  • Page 41 3. RE-INSERT THE KNOB INTO THE ALIGNED HOLES AND TWIST THE KNOB CLOCKWISE TO FULLY INSERT THE KNOB THROUGH THE FRAME PIECES. 4. CHECK THAT THE SEAT BACK IS SECURE.

  • Page 42: Getting On The Jetkart

    2. Making Moves Getting on the JetKart ® 1. PLACE THE JETKART® ON A FLAT SURFACE WITH THE HOVERBOARD TURNED OFF. 2. POSITION THE HANDLES SO THAT THEY ARE IN THE NEUTRAL POSITION. CAREFULLY SIT ON THE JETKART® AND THEN PLACE YOUR FEET ON THE FOOTREST. 3.

  • Page 43: Riding The Jetkart

    Riding the JetKart ® IMPORTANT: TIGHTEN ALL BOLTS, NUTS, AND KNOBS BEFORE EACH RIDE. TO GO FORWARD - PUSH DOWN BOTH HANDLES TO BRAKE/REVERSE - PULL UP BOTH HANDLES TO TURN RIGHT – PUSH DOWN LEFT HANDLE TO TURN LEFT – PULL UP LEFT HANDLE AND AND PULL UP RIGHT HANDLE PUSH DOWN RIGHT HANDLE...

  • Page 44: Helmet Safety

    Helmet Safety PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS.

  • Page 45: Care & Maintenance

    Jetson's user manuals (refer to ridejetson.com/support). Under this warranty, you will be able to direct your claims to Jetson even in situations where you purchased the Jetson Product from one of our authorized retailers.
  • Page 46 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
  • Page 48 US/CANADA: 1-888-976-9904 MEX: +001 888 976 9904 UK: +44 (0)33 0838 2551 Manufactured in Zhejiang, China Imported by Jetson Electric Bikes LLC. P.O. Box 320149, 775 4th Ave #2, Brooklyn, NY 11232 www.ridejetson.com Made in China Date Code: 10/2022 Document Edition: v2.0...

Table of Contents