Table of Contents
Advertisement
More guidance
Restoring to factory settings
After restoring your scale to its factory settings, all user information and data on the
scale will be deleted. Make sure you want to do this.
Method 1: Open the Huawei Health app, touch Devices, select the connected scale to enter
its details screen, and touch Restore factory settings.
Method 2: Open the scale's battery cover, and press and hold the Reset button for three
seconds. When all LED indicators are on, your scale is restored to its factory settings.
For Method 1, your scale should be connected to the Huawei Health app to restore to
factory settings. (You can step on your scale to activate it, then connect it to the Huawei
Health app.)
Viewing the SN
You can view the serial number (SN) on the package or on the back of the scale.
Updating the scale
1
Open the Huawei Health app, touch Devices, and select the scale name to enter its details
screen. Make sure the scale shows as connected.
2
Touch Firmware update, and go to the Firmware update screen to view the current
system version of your device.
3
Touch Check for updates to start an update check. If there are updates, follow the
onscreen instructions to update your scale. If there are no updates, your scale is up to
date.
Do not step on the scale, press the scale, or remove the batteries during an update.
•
Maintenance
Keep the device free of dust and oil. Use it in a ventilated, dry environment to guard
•
against rust.
The device is used for measurements. It is recommended to clean the device regularly, and
•
remove the batteries if the device is not used for a long time.
It is also recommended to keep the device in a dry place, away from strong sunlight and
•
dust.
Do not uninstall or remove scale components during daily use.
•
8
Hide quick links:
Advertisement
Table of Contents
