Related Manuals for Samsung DVEG45T3400 Series
Summary of Contents for Samsung DVEG45T3400 Series
- Page 1 Dryer User manual DVE(G)45T3400* DV3400T_DC68-03784M-02_EN.indd 1 2020-12-07 10:47:13...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Warnings Cautions Installation requirements Key installation requirements Location considerations Ducting requirements Mobile home installation Exhausting requirements Gas requirements Electrical requirements Installation What’s included... - Page 3 Maintenance Cleaning Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Specification sheet English 3 DV3400T_DC68-03784M-02_EN.indd 3 2020-12-07 10:47:13...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. - Page 5 WARNING - Risk of Fire • Clothes dryer installation must be performed by a qualified installer. • Install the clothes dryer according to the manufacturer’s instructions and local codes. • Do not install a clothes dryer with flexible plastic venting materials.
- Page 6 Safety information WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode.
-
Page 7: California Proposition 65 Warning
WARNING - What to do if you smell gas: • Do not try to light any appliance. • Do not turn on the appliance. • Do not touch any electrical switch. • Do not use any phone in your building. •... - Page 8 Safety information 4. Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance. 5. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 6.
-
Page 9: Warnings
21. Control board and inlet valve are intentionally not grounded and may present a risk of electric shock only during servicing. • Do not contact this part while appliance is energized. Warnings WARNING • Ensure pockets are free from small, irregularly shaped hard objects, foreign material, etc. - Page 10 Safety information • Do not wash clothing with large buckles, buttons, or other heavy metal or solid objects. • Gas leaks may not be detected by smell alone. • Gas suppliers recommend you purchase and install a UL-approved gas detector. •...
-
Page 11: Installation Requirements
Installation requirements Read through the following instructions before installing the dryer, and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. - Page 12 Installation requirements Dimensions Type Front loading dryer A. Overall height 43.9 (1117) 27.0 (686) B. Width Dimensions (in. (mm)) C. Depth with door open 50.1 (1273) D. Depth 30.2 (768) English DV3400T_DC68-03784M-02_EN.indd 12 2020-12-07 10:47:14...
- Page 13 Clearance requirement This clearance requirement is applicable for dryers only. NOTE • For washer’s clearance requirement, see the washer’s user manual. • If the washer and dryer have different clearance requirements, use the one with the larger value. Alcove or closet installations WARNING •...
- Page 14 Installation requirements This clearance requirement is applicable for washer and dryer pair installation. Side by side installation 1 in. (25 mm) 21 in. (533 mm) 1 in. (25 mm) 5.9 in. (150 mm) English DV3400T_DC68-03784M-02_EN.indd 14 2020-12-07 10:47:15...
-
Page 15: Ducting Requirements
Ducting requirements Recommended Use only for short-run installation Weather hood type 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° Rigid Rigid elbows 80 ft. (24.4 m) 74 ft. (22.6 m) 68 ft. (20.7 m) 62 ft. (18.9 m) 57 ft. (17.4 m) 51 ft. -
Page 16: Mobile Home Installation
Locate the dryer in an area that has adequate fresh air. A minimum of 72 in² (465 cm²) of unobstructed space is required. Call 1-800-SAMSUNG (726-7864) for information on purchasing the Floor Anchoring Kit as an accessory. All mobile home installations must be exhausted to the outside with the exhaust duct termination securely fastened to the mobile home structure, using materials that will not support combustion. -
Page 17: Exhausting Requirements
Exhausting requirements Outside the United States and Canada The dryer must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl • Refer to the local codes. space, or a concealed space of a building. WARNING Exhausting the dryer to the outside will •... -
Page 18: Gas Requirements
Installation requirements Gas requirements WARNING • Your dryer must be disconnected from the gas supply pipe system during any pressure • Use only natural or LP (liquid propane) testing of the system at pressures greater gases. than 1/2 psi (3.5kPa). •... -
Page 19: Electrical Requirements
Electrical requirements Grounding The wiring diagram is located on the plate under the control panel or rear frame. This dryer must be grounded. In the event of malfunction or breakdown, the ground WARNING will reduce the risk of electrical shock by •... - Page 20 Installation requirements Electric models Electrical connections Before operating or testing, follow all WARNING grounding instructions in the “Grounding” • Your dryer has an optional cord with section. An individual branch (or separate) an equipment-grounding conductor circuit serving only your dryer is and a grounding plug.
- Page 21 Electric models – Canada Only WARNING A 120 / 240 volt, 60 Hz AC approved Risk of Electric Shock electrical service fused through a When local codes allow, you can connect 30-ampere fuse or circuit breaker on both the dryer’s electrical supply with a new sides of the line is required.
-
Page 22: Installation
What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the accessories, contact a local Samsung customer center or the retailer. Dryer at a glance 01 Control panel... - Page 23 Accessories & tools Required tools Pliers Cutting knife Pipe wrench (gas Nut driver models only) Level Philips screwdriver Duct tape Wrench LPG-safe compound or Teflon Tape (for gas installation) WARNING Packing materials can be dangerous to children. Keep all packing materials (plastic bags, polystyrene, etc.) out of children’s reach.
-
Page 24: Step-By-Step Installation
Installation Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. • Do not remove the protective film on the door before completing the product installation. If you remove the protective film before the installation is complete, the door may get scratched or damaged during installation. - Page 25 STEP 3 Connect the electrical wiring First, read through the “Electrical requirements” section, and follow these steps. 3-wire system 1. Loosen or remove the screws from the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block.
- Page 26 Installation 4-wire system 1. Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician.
- Page 27 • A strain relief must be used. Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a ” (1 cm) deep well socket. • Since january 1, 1996, The national electric code requires that new wiring (not existing) utilize a 4-wire connection to this dryer.
-
Page 28: Vent Blockage Test
Installation STEP 5 Power on (Gas models) Make sure all gas connections, the exhaust line, and all wiring is connected correctly. Then, plug the power cord into a power source and check the dryer’s installation and operation using the final checklist in Step 7 below. STEP 6 Final check When installation is complete, confirm that: •... - Page 29 2. Press the POWER button to turn the dryer on, then simultaneously press and hold the Adjust Time and Dryness buttons for 3 seconds. “InS or In” appears in the dryer’s display. (If you have started other procedures before the Vent Blockage Test, the dryer will not enter the Vent Blockage Test mode.) 3.
- Page 30 Installation Installation check codes Check code Meaning Solution Vent condition is good. Clg (Cg) The vent is clogged. 1. Clean the lint filter. About 80 % of the vent is clogged. 2. Check your vent condition. C80 (C8) (This may decrease the drying (Refer to the “Ducting performance.) requirements”...
-
Page 31: Exhaust Ducting Guide
Exhaust ducting guide Ducting 1. Make sure the dryer is installed properly so the air exhausts freely. 2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use lint-trapping screws. 3. To facilitate the exhaust, keep the ducts as straight as possible. Cleaning Clean all old ducts before installing the dryer, and make sure the vent flap opens and closes freely. - Page 32 Installation 4. Remove the two screws from the lever holder, and then remove the holder cover. 5. Put the lever holder on the other side as shown, and then tighten the screws. Install the holder cover on the opposite side as shown. 6.
- Page 33 8. Remove the glass holder, and switch the positions of: a. the hinge cover and the door handle. b. the hinge holder and the glass-guide holder 9. Remove the door lever, and then move it to the other side as shown. 10.
-
Page 34: Before You Start
Before you start Here are a few things you should know before starting your dryer. Sort and load • Put one wash load in the dryer at a • Overloading reduces the tumbling time. performance, resulting in uneven • Do not mix heavy and lightweight items drying and wrinkling. -
Page 35: Operations
Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the “Safety information“ before operating this appliance. Feature panel Turn the cycle selector to select a desired cycle. When a cycle is 01 Cycle Selector selected, the cycle indicator lights up. - Page 36 Operations Press to adjust the drying time for the Manual Dry cycles. This is not available with the Sensor Dry cycles because the dryer determines the drying time by sensing the current moisture level of the load. * Damp Alert This alert is available for all sensor dry cycles except for ACTIVE 04 Time WEAR and SANITIZE.
-
Page 37: Simple Steps To Start
Icon description This icon appears when the dryer operates the cycle which Sensor Dry senses the internal humidity to determine the drying time. This icon displays after every load as a reminder to clean the lint filter. Clean the lint filter before every cycle and Filter Check make sure the filter is properly inserted before starting a cycle. -
Page 38: Cycle Overview
Operations Cycle overview Sensor Dry Sensor Dry cycles sense moisture in the load and stop the dryer when the load reaches the dryness level you have selected with Dryness. Cycle Description NORMAL For most fabrics including cottons and linens. For drying items made out of heavy fabrics, such as jeans, HEAVY DUTY corduroys, or work clothes, with high temperature heat. -
Page 39: Cycle Chart
Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about full. - Page 40 Operations NOTE : factory setting, : can be selected Temperature setting Time Cycle setting High Medium Extra Low NORMAL HEAVY DUTY BEDDING Sensor Dry PERM PRESS DELICATES SANITIZE TIME DRY ...
-
Page 41: Cycle Guide
Cycle guide The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference. Cycle Description Follow the care label instructions or dry using BEDDING. Bedspreads &... -
Page 42: Special Features
Operations Special features Child Lock Damp Alert Child Lock prevents children from To activate/deactivate Damp Alert, press playing with the dryer. When Child Lock and hold Time for 3 seconds. is activated, all buttons except for the NOTE POWER button are disabled. If a load contains mixed fabrics, the Damp To activate/deactivate Child Lock: Alert indicator blinks when average... - Page 43 To use Smart Care, you must have the • If you hold the smartphone at an angle Samsung Smart Care app installed on your to the dryer’s display, the dryer may smartphone. not recognize the information code.
-
Page 44: Maintenance
Maintenance Keep the dryer clean to prevent decreased performance and to lengthen its life cycle. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. -
Page 45: Troubleshooting
Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Problem Action • Make sure the door is latched shut. • Make sure the power cord is plugged into a live electrical outlet. - Page 46 Troubleshooting Problem Action • Check all of the above, plus... • Make sure the exhaust hood outside your home can open and close freely. • Check the exhaust system for lint buildup. Ducting should be inspected and cleaned annually. • Use a 4” rigid metal exhaust duct. •...
- Page 47 Problem Action • Seams, pockets, and other similarly heavy areas may not be completely dry when the rest of the load has reached the selected dryness level. This is normal. You can choose a higher dryness level or a cycle that involves a higher dryness level.
- Page 48 Extended time. reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. English DV3400T_DC68-03784M-02_EN.indd 48 2020-12-07 10:47:25...
-
Page 49: Information Codes
• Contact a Samsung service center. The PBA needs to be checked. • Unplug the power plug and contact a Samsung service center. If any information code keeps appearing on the screen, contact a Samsung service center. English 49 DV3400T_DC68-03784M-02_EN.indd 49... -
Page 50: Specifications
Specifications Fabric care chart Bleach The following symbols provide garment care direction. The clothing care labels Any bleach (when needed) include symbols for drying, bleaching, drying and ironing, or dry cleaning when Only non-chlorine (color-safe) necessary. The use of symbols ensures bleach (when needed) consistency among garment manufacturers Tumble dry... -
Page 51: Protecting The Environment
Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Drip dry Warning symbols for laundering Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment This appliance is manufactured from recyclable materials. -
Page 52: Specification Sheet
Specifications Specification sheet Type Front loading dryer Model name DVE(G)45T3400* Capacity (Cu.ft) Water pressure - psi (kPa) 20-116 (137-800) NET weight lb (kg) 119 (54) Electric (W) 5300 Heater rating Gas (BTU/hr) 20000 Power consumption (W) 5400 English DV3400T_DC68-03784M-02_EN.indd 52 2020-12-07 10:47:29... - Page 53 If the product is located in an area where service by a SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring the product to a SAMSUNG authorized service center for service.
- Page 54 Visits by an authorized servicer to explain product functions, maintenance or installation are not covered by this limited warranty. Please contact SAMSUNG at the number below for assistance with any of these issues. English DV3400T_DC68-03784M-02_EN.indd 54...
- Page 55 PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
- Page 56 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 57 God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book;...
- Page 58 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English DV3400T_DC68-03784M-02_EN.indd 58 2020-12-07 10:47:29...
- Page 59 Memo DV3400T_DC68-03784M-02_EN.indd 59 2020-12-07 10:47:30...
- Page 60 Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca_fr/support (French) DC68-03784M-02 DV3400T_DC68-03784M-02_EN.indd 60 2020-12-07 10:47:30...