Speed Dialer; Storing Phone Numbers; Dialing A Stored Phone Number - Panasonic KX-TG5471S Operating Instructions Manual

Speed Dialer

Storing Phone Numbers

You can store up to 10 phone numbers in the base unit. The dialing buttons ([0] to
[9]) function as memory stations.
Make sure the base unit is not being used.
1
Press [PROGRAM].
• The IN USE indicator flashes and " "
is displayed.
2
Enter a phone number of up to 32
digits.
• The last digit of the entered number is
displayed.
• If you misdial, press [PROGRAM],
and start again from step 1.
3
Press [AUTO].
4
Press a memory station number
([0] to [9]).
• A long beep sounds and the phone
number is saved.
• To store other numbers, repeat from
step 1.
• If a pause is required when dialing, press [REDIAL/PAUSE] where needed. " " is
displayed when [REDIAL/PAUSE] is pressed. A pause counts as one digit (p. 50).
• When [*] is pressed, " " is displayed. When [#] is pressed, " " is displayed.
• If a phone number is stored in a memory location which already contains a phone
number, the old number will be erased.
• We recommend you make a note of which phone numbers are stored in which
memory locations.
To erase a stored number
1. Press [PROGRAM], then press [AUTO].
2. Press the memory station number ([0] to [9]) for the phone number to be erased.
• A long beep sounds and the phone number is erased.

Dialing a Stored Phone Number

1
Press [SP-PHONE].
2
Press [AUTO].
3
Press a memory station number ([0] to [9]).
• The stored number is dialed.
• Speed dial numbers stored in the base unit can only be dialed from the base unit.
44
Base Unit
Memory
Station
Numbers
Base Unit
[REDIAL/PAUSE]
[PROGRAM]
[AUTO]
[SP-PHONE]