Base unit ringer tone
Base Unit
Make sure the base unit is not being used.
1
Press [<] or [>].
• The base unit will ring using the current ringer tone. If the ringer volume has
been turned off, the base unit will not ring (p. 20).
2
Press [<] or [>] repeatedly to select the desired tone.
• Each time you press [<] or [>]
• To stop ringing, press [STOP].
• You can also select the ringer tone by pressing [1] to [7].
[1] to [3]: Bell ringer patterns
Selecting the base unit ringer tone by using the
1
Press [MENU].
2
Scroll to "Initial setting" by pressing [d] or [B], then press the
soft key (
SELECT
3
Scroll to "Set base unit" by pressing [d] or [B], then press the
soft key (
SELECT
4
Press the soft key (
5
Follow steps 4 and 5 of "Handset ringer tone" on page 20.
• When selecting the ringer tone, the base unit will ring. If the base unit ringer
volume has been turned off (p. 20), the base unit will not ring.
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is "level 3".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "LCD contrast" by pressing [d] or
[B], then press the soft key (
4
Select the desired contrast by pressing [d]
or [B].
• The contrast will change.
• The number of steps indicates the contrast level.
5
Press the soft key (
For assistance, please call: 1-800-211-PANA(7262)
(use either the handset or the base unit)
,
).
).
) at "Ringer tone".
SELECT
Handset
SELECT
), then press [OFF].
SAVE
Programmable Settings
another ringer tone will be heard and selected.
[4] to [7]: Melody patterns
).
SELECT
).
Handset
Initial setting
LCD contrast
Ex. Level 3
LCD contrast
Low
High
21