Sealey TS02 Instruction Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instruction protection
manual
1. SAFETY
Wear approved safety goggles, gloves, and footwear, when operating the folder. Your local Sealey dealer offers a complete range of
9
safety equipment.
Use the tool only for its intended purpose.
9
Regularly check all parts of the folder for damaged parts. DO NOT use if any of its components are broken, worn or damaged.
9
Use original Sealey spare parts and accessories. Use of non-recommended spare parts may be dangerous and will invalidate
9
warranty.
Ensure good footing, wear non slip footwear.
9
DO NOT operate this tool while under the influence of drugs, alcohol or other impairing medication.
8
DO NOT Allow unqualified persons to operate the metal folder. Keep children away from the tool.
8
2. INTRODUCTION
Floor standing sheet metal folder, fitted with mounting plates. Capable of bending a 1mm rod, of limited length, up to and beyond a 90°
angle. The unique patented endless design and removable folding plate allows the user to fold, channel and offset any length of sheet
metal up to 20 Gauge thick, by simply moving the sheet as required after each fold. With adjustable fold plate to help achieve the
cleanest fold possible. Ideal for the small garage or restoration operation.
3. SPECIFICATION
MODEL NO: ......................................................... TS02
Capacity: .......................... 20 Gauge Sheet, Ø1mm Rod
© Jack Sealey Limited
1000MM FLOOR STANDING SHEET METAL
FOLDER
MODEL NO:
Wear protective
Wear safety
gloves
footwear
Original Language Version
TS02
1 Top/Base plate clamp
2 Adjustment/Positioning Cam
3 Removable Folding Plate
4 Centre adjustment nut
5 Top Plate
6 Standing plate
7 Folding Handles
TS02 Issue 2 (H) 24/10/22