Table of Contents
Advertisement
scope of technology which existed at the time of shipment from Mitsubishi.
6) Product failure due to unavoidable external causes such as fires, or due to natural
disasters such as earthquakes, thunderstorms, and damage by wind or floods, which
are beyond the control of Mitsubishi.
7) Product failure due to any other cause which is not the responsibility of Mitsubishi,
or failures which the customer recognizes as not the responsibility of Mitsubishi.
Fee-Charged Warranty Period after Production Discontinuation
Mitsubishi shall accept products for fee-charged repairs for a period of seven years after
production of that product has been discontinued. However, discontinued products cannot
be newly provided or replaced.
Lost Opportunity and Secondary Loss Disclaimer
Regardless of the warranty period, Mitsubishi bears no responsibility for losses incurred by
the customer from causes which are not the fault of Mitsubishi. Moreover, Mitsubishi shall
bear no responsibility for the following:
* A customer's lost opportunities or profit losses caused by a product failure.
* Losses caused by special conditions, regardless of whether or not Mitsubishi could
have foreseen those conditions.
* Costs required for secondary damage, accident compensation, and replacement.
* Compensation for damage to items other than the Mitsubishi product.
Produce Specification Changes
Specifications listed in catalogs, specification manuals, and technical information may be
changed at any time without prior notice.
Product Application
■Conditions of use
This Mitsubishi product shall not be used in applications where its failure or malfunction will
have serious consequences, except in cases where an adequate backup system, etc. is
provided.
■Forbidden applications, etc.
(1) This Mitsubishi product was designed and manufactured for general-purpose industrial
applications only. It should not be used in applications such as nuclear power stations,
general power stations, and public transportation (railroads, airlines, etc.) where its
operation affects the public at large, or in vehicles, medical equipment, equipment for
recreation and amusement, safety equipment, combustion systems, and in applications
where government or industrial regulation compliant equipment is used which requires
special quality assurance specifications.
(2) This product should also not be used in applications where human life and property
are at stake, and where an especially high level of reliability is required in terms of
safety and control system.
(3) Note that even with these applications, if the user approves that the application is to
be limited and a special quality is not required, application shall be possible.
Other
The above content applies to products which are sold and used within Japan.
When you use this product in the other countries, please follow the law of each country
(area).
C&C CENTER OVERSEAS SUPPORT GROUP（JAPAN）
Mail ：
･The contents of this manual are subject to change without prior notice.
･Unauthorized reproduction prohibited
X903200702B
osb.webmaster@melsc.jp
- 7 -
Issue Date: July, 2022
Advertisement
Table of Contents
