Radio; Radio Basic Operation - Kenwood DNR1008RVS Instruction Manual

Radio

Radio

Radio Basic Operation

Most functions can be controlled from the
source control screen.
To listen to the Radio source, touch [Radio]
icon on the source selection screen. (P.14)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.86).
Control screen
1
2
Open the drawer
2
2
36
Operation keys
1
• [E] [F] : Tunes in a station. The method of
switching frequencies can be changed (see
Seek mode).
• [ ] : Displays the Graphic Equalizer screen.
(P.76)
Preset list
2
• Touching [ ]/[ ] allows you to change the
display size.
• Recalls the memorized station.
• When touched for 2 seconds, stores the
currently being received station in the
memory.
Band keys
3
5
Switches bands (between FM and AM).
Seek mode
4
4
Touch to switch seek mode in the following
3
sequence: [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in the memorized stations one
7
after another.
5
• [MANUAL]: Switches to the next frequency
manually.
Function panel
5
6
Touch the right side of the screen to display the
function panel. Touch again to close the panel.
• [TI] (FM only) : Selects the traffic information
mode. For details, see Traffic Information
(P.38).
5
• [[AME]: Presets stations automatically. For
details, see Auto memory (P.37).
• [PTY] (FM only): Searches for a program by
program type. For details, see Search by
program type (P.38).
• [MONO] (FM only) : Selects the Monaural
reception mode.
4