Radio; Radio Basic Operation; Memory Operation - Kenwood DNR1008RVS Quick Start Manual

Radio

Radio

Radio Basic Operation

To listen to the Radio source, touch [Radio]
icon on the source selection screen. (P.12)
Control screen
1
2
Operation keys
1
• [E] [F] : Tunes in a station. The method of
switching frequencies can be changed (see
Seek mode).
• [ ] : Displays the Graphic Equalizer screen.
(P.26)
Preset list
2
• Touching [ ]/[ ] allows you to change the
display size.
• Recalls the memorized station.
• When touched for 2 seconds, stores the
currently being received station in the
memory.
Band keys
3
Switches bands (between FM and AM).
Seek mode
4
Touch to switch seek mode in the following
sequence: [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in the memorized stations one
after another.
• [MANUAL]: Switches to the next frequency
manually.
20
Function panel
5
Touch the right side of the screen to display the
function panel. Touch again to close the panel.
• [TI] (FM only) : Selects the traffic information
mode.
• [[AME]: Presets stations automatically. For
details, see Auto memory (P.20).
• [PTY] (FM only): Searches for a program by
5 program type.
• [MONO] (FM only) : Selects the Monaural
4
reception mode.
3

Memory Operation

Ñ
Auto memory
You can store stations with good reception in
the memory automatically.
4
1
Touch desired band key.
2
Touch [
Touch [AME].
3
Touch [Yes].
h Auto memory starts.
h
Ñ
Manual memory
You can store the currently being received
station or channel in the memory.
1
Select the station you wish to store in the
memory.
2
Touch [FM#] (#:1-15) or [AM#] (#:1-5) in
which you want to store the station for 2
seconds until a beep sounds.
] on the right side of the screen.