74
1-5. For safe driving with children on board
mode. In lock mode, the belt cannot
be extended.
5
While pushing the child restraint
system down into the rear seat,
allow the shoulder belt to retract
until the child restraint system is
securely in place.
After the shoulder belt has retracted to a
point where there is no slack in the belt,
pull the belt to check that it cannot be
extended.
6
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.76)
Forward-facing Convertible
■
seat
1
Adjust the seat.
When using the front passenger
seat
If installing the child restraint system to the
front passenger seat is unavoidable, refer
to P.71for the front passenger seat adjust-
ment.
When using the rear seat
If there is a gap between the child seat and
the seatback, adjust the seatback angle
until good contact is achieved.
2
Remove the head restraint if it inter-
feres with your child restraint sys-
tem. (P.121)
If the head restraint cannot be removed,
raise it to the uppermost position.
3
Place the child restraint system on
the seat facing the front of the vehi-
cle.
4
Run the seat belt through the child
restraint system and insert the plate
Need help?
Do you have a question about the RZ450E 2023 and is the answer not in the manual?
Questions and answers