Warranty And Support; Recycling; Technical Specifications - Philips Lumea SC1994 Manual

Problem
The results of the treatment
are not satisfactory.

Warranty and support

Recycling

Technical specifications

Transport and storage
conditions
Possible cause
You have used a light intensity
setting which is too low for
you.
You did not cover all areas to
be treated.
The device is not effective on
your body hair color.
You do not use the device as
often as recommended.
You respond more slowly to IPL
treatment.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
-
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
-
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative consequences for
the environment and human health.
Lumea remains operational within its specification in NORMAL USE after
transport or storage in the following environmental conditions:
-25 °C to 5 °C, and
5 °C to 35 °C at a relative humidity up to 90 % RH, non-condensing, and
>35 °C to 70 °C at a water vapor pressure up to 50 hPa
Solution
Select a higher setting next time.
The surface of the attachment should
overlap the previous spot to make sure you
flash the complete skin area, but treating
the same area multiple times does not
increase efficacy.
If you have light blond, grey, red or white
hair, the treatment is not effective.
To remove all hairs successfully, we advise
you to follow the recommended treatment
schedule. You can reduce the time
between treatments, but do not treat more
often than once every two weeks.
Continue using the device for at least
6 months, as hair growth can still decrease
over the course of this period.
25
English