Miele Professional Service - Miele PRI 210 Operating Instructions Manual

Cleaning and care
PRI 210/214
210-215 mm
Within this range the roller cover should be wound cylindrically over the entire length of
the roller.
During the replacement of the roller padding, Miele Professional Service should check
whether the carbon brushes in the drive motor need to be replaced as well.

Miele Professional Service

In the event of a malfunction, please call Miele Professional Service. Miele will require the
model and serial number [SN] of the flatwork ironer.
Both can be found on the data plate which is on the inside of the right side stand.
Position of the data plate
38
PRI 217
250-255 mm