Miele Customer Service Department - Miele PRI 210 Operating Instructions Manual

PRI 210/214
210–215 mm
Within this range the roller should be wound cylindrically over its entire length.
When the roller padding is replaced, the Miele Customer Service Department should
check whether the carbon brushes of the drive motor need to be replaced as well.

Miele Customer Service Department

In the event of a malfunction, contact the Miele Customer Service Department. The
Miele Service department requires the model and serial number [SN] of the ironer.
You will find these on the data plate on the inside of the right-hand side column.
Position of the data plate
en - Cleaning and care
PRI 217
250–255 mm
187