Advertisement
•
After wall mount installation, movement may occur on some TV models depending on the rear shape of the
TV.
In
this case, use the separation holder
(0
).
Triangular support allows more stable wall mount installation. However, distance from the wall may
increase.
•
If you cannot adjust the horizontal level by using the horizontal adjustment function, check if the installation was
done properly.
If you cannot use the horizontal adjustment
function,
the fixers on the wall mount's support frame are not
properly fixed. Make sure to install them properly.
•
The horizontal level that can be adjusted is just 1 to 2
degrees.
To adjust t he horizontal
level
at more angles than
this range, reinstall the wall mount.
-
---=
-----=------- ---
---------:-=
----- -- -
-
l
t t
l
•
If the wall mount's fixers are not fixed to the end as shown in the figure, subtle impacts may move the TV. In this
case, make sure to install the fixers properly so that they are fixed to the TV all the way to the end.
• To prevent cable damage when dismounting the TV from the wall, disconnect the power cable and the optical
cable before removing the wall mount.
•
When detaching the TV from the wall, first pull it forward, and then be sure that two people pull it upwa rd
simultaneously. Do not apply direct force on the display .
..
...................................
...................................
...................................
...................................
······················•·••·••······
- English
6 -
Advertisement
