To Set Source Output Mode; To Apply Dc Voltage/Current; To Stop Source Output; To Set Limit Value - Keysight Technologies B2961B User Manual

Front Panel Operations
To Set Source Output

To Set Source Output Mode

1. For the Single view, press the Mode assist key. For the Dual view, press the
2. Press VOLTS (V) for the voltage output or AMPS (I) for the current output.

To Apply DC Voltage/Current

1. For the Single view, press the Source assist key. For the Dual view, press the
2. Enter the output value by using the numeric/alpha keys, rotary knob, and
3. Press the rotary knob or assist key to fix the setting value.
4. Press the On/Off switch for channel 1 or 2 (Ch 1 or Ch 2).

To Stop Source Output

1. Press the On/Off switch for channel 1 or 2 (Ch 1 or Ch 2).

To Set Limit Value

For details on this function, see
1. For the Single view, press the Limit assist key. For the Dual view, press the Ch1
2. Enter the limit value by using the numeric/alpha keys, rotary knob, and arrow
3. Press the rotary knob or assist key to fix the setting value.
170
Ch1 Mode or Ch2 Mode assist key.
The field pointer moves to the Source mode setup field.
Ch1 Source or Ch2 Source assist key.
The field pointer moves to the Source value setup field.
arrow keys.
The channel starts the specified voltage/current output. While the switch is
turned green, the channel continues the output and changes the value
immediately if it is changed.
The output and measurement are stopped and the switch turns off.
Limit or Ch2 Limit assist key.
The field pointer moves to the Limit field.
keys.
"Limit/Compliance" on page
Keysight B2961B/B2962B User's Guide, Edition 1
190.