Advertisement
Setup the IP Address
To modify the IP address follow these steps:
1. F1 (menu)
2. Select 01 Scroll mode with the Center button
3. Press the Down Arrow multiple times until you highlight o:Option Card
4. Select o:Option Card with the Center button
5. Press F2 (Next Gr) multiple time until you get to the group oL-01 IPv4 IP address
6. Press the Down Arrow multiple times until you highlight oL-03 IPv4 IP address
7. Select oL-03 IPv4 IP address with the Center button
8. Using the Up and Down, Left and Right Arrows set the IP Address group 3 to 208
9. Press F2 (Save)
10. Repeat steps 6 to 9 to set the remaining address groups
Before the Control can connect to the VFD these parameters need to be set. On default you should
only need to set the ones in bold.
Parameters
oL-01
oL-02
oL-03
oL-04
oL-09
oL-10
oL-11
oL-12
Open the Configurable Parameters
To program the VFD you will need to utilize the Parameters. Follow the next few steps to find the
Hitachi parameters.
Description
IPv4 IP Address (1)
IPv4 IP Address (2)
IPv4 IP Address (3)
IPv4 IP Address (4)
IPv4 Default Gateway (1)
IPv4 Default Gateway (2)
IPv4 Default Gateway
(3)
IPv4 Default Gateway (4)
Default
192
168
208
95
192
168
208
1
Range
IP Address
IP Address
IP Address
IP Address
IP Address
IP Address
IP Address
IP Address
Advertisement
