Synco G1, G1 A1 - Microphone Manual

Caring For Your SYNCO Product

• Please keep the product in a dry, clean, dust-free environment.
• Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
• Use only a soft and dry cloth for cleaning the product.
• Malfunction may be caused by dropping, impact of external force.
• Do not attempt to disassemble the product. Doing so voids warranty.
• Please have the product checked or repaired by authorized technicians if any malfunctions happened.
• Failure to follow all the instructions may result in mechanics damage.
• Warranty does not apply to human errors.

Package List

Product Instruction

TX Transmitter

1. External Mic Input
2. USB-C Port
3. Power
4. Reset(Help with Eject Pin)
5. Low Cut
6. Pairing
7. Built-in Mic
8. Pocket Clip
9. Pairing Indicator
10. Power Indicator

RX Receiver

1. USB-C Port
2. Power
3. Reset(Help with Eject Pin)
4. Gain Control
5. Pairing
6. 3.5mm Audio Output
7. 3.5mm Monitoring Jack
8. Pocket Clip
9. Pairing Indicator
10. Power Indicator

Indicator

Operations

1. Power Button
   Long press the power button for 2 seconds to turn on/off the system.
2. Pairing
   The system will pair automatically after power on. If you need manual pairing, long press the pairing button on the RX and TX for 3 seconds, the system will start to pair.
3. Connection
   The receiver outputs audio signals to recording devices with a 3.5mm TRRS Phone Cable or a 3.5mm TRS Camera Cable. Please use the corresponding cable based on your device.
4. Installation
   Attach the transmitter or the external mic to the speaker's clothing. Install the receiver to the camera's hot shoe via the pocket clip.
   (Note: When using the external mic, please insert it into the mic input properly)
   
5. Gain Control
   The initial value of the gain is the microphone's original volume. Each press of the gain control button increases the gain by one level, fourth level at most. When the gain is at max level, press once and return to initial value..
6. Charging
   Please fully charge the TX and RX via the USB-C port and the charging cable before use..

Specifications

TX Transmitter

RX Receiver

Microphone

Warranty

Warranty Period
Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user.

Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO's customer service through email atsupport@syncoaudio.com.

Guangzhou Zhiying Technology Co., Ltd

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000

support@syncoaudio.com

www.syncoaudio.com

https://www.facebook.com/syncomicrophones