Safety Precautions; For Your Safety; Choosing The Installation Location - Siemens optiPoint 150 S Administration Manual

Hide thumbs Also See for optiPoint 150 S:
Table of Contents

Advertisement

Safety Precautions

Safety Precautions

For Your Safety

The optiPoint 150 S IP phone conforms to the European standard EN 60
950 which governs the safety of information technology equipment includ-
ing electronic office equipment. This device has been designed with safe-
ty in mind, thus protecting both individuals and objects.
There is always the danger of small objects being swallowed by young chil-
dren. In the case of optiPoint 150 S, this applies in particular to the con-
necting cord clip.
Please make sure that such items are not accessible to children.

Choosing the Installation Location

2
Use only the enclosed power supply together with the special LAN ca-
ble.
Never open the power supply enclosure.
The telephone should be operated in a controlled environment with an
ambient temperature between 5°C and 40°C (41°F and 104°F).
Do not install the telephone in a room where large quantities of dust
accumulate; this can considerably reduce the service life of the tele-
phone.
Do not expose the telephone to direct sunlight or any other source of
heat, as this is liable to damage the electronic equipment and the plas-
tic casing.
Do not operate the telephone in damp environments such as bath-
rooms.

Advertisement

Table of Contents
loading

Table of Contents