Digital Component Hookups - Sony HT-DDW830 Operating Instructions Manual

Digital Component Hookups

Connect the digital output jacks of your DVD player and
satellite tuner (etc.) to the receiver's digital input jacks to
bring the multi channel surround sound of a movie
theater into your home. To enjoy full effect of multi
channel surround sound, five speakers (two front
speakers, two surround speakers, and a center speaker)
and a sub woofer are required. You can also connect an
LD player with an RF OUT jack via an RF demodulator,
such as the Sony MOD-RF1 (not supplied).
DVD or LD
player (etc.)*
OUTPUT
DIGITAL
OPTICAL
DIGITAL
OPTICAL
DVD/LD
IN
TV/SAT
IN
DVD/LD
IN
COAXIAL
L
R
FRONT
MULTI CH IN
When making digital audio connections to a DVD player, connect to either the coaxial OR optical digital jacks, and not both. It is recommended to
*
make digital audio connections to the coaxial jack.
Example of LD player connected via an RF demodulator
Please note that you cannot connect an LD player's AC-3 RF OUT jack directly to the receiver's digital input jacks. You must
first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RF demodulator, then
connect the RF demodulator's optical or coaxial digital output to the receiver's OPTICAL or COAXIAL DVD/LD IN jack.
Refer to the instruction manual supplied with your RF Demodulator for details on AC-3 RF hookups.
LD player
Note
When making connections as shown above, be sure to set INPUT MODE (8 on page 23) manually. The receiver may not operate correctly
if INPUT MODE is set to "AUTO."
8
Downloaded from: https://www.usersmanualguide.com/
TV or Satellite
OUTPUT
VIDEO
OUT
AUDIO
OUT
OUTPUT
OUTPUT
L
DIGITAL
DIGITAL
COAXIAL
OPTICAL
R
ANTENNA
AM
VIDEO IN VIDEO IN
FM
75 Ω
COAXIAL
L L L
CENTER
R R R
SURROUND IN IN OUT IN AUDIO IN AUDIO IN
SUB
WOOFER
AUX CD MD/TAPE TV/SAT DVD/LD
VIDEO OUT
AC-3 RF
OUT
Required cords
Optical digital cords (not supplied)
Coaxial digital cord (supplied)
Orange
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Yellow (video)
White (L/audio)
tuner
OUTPUT
Red (R/audio)
VIDEO
OUT
Note
AUDIO
OUT
The optical and coaxial digital input jacks on the receiver are
compatible with sampling frequencies of 32 kHz, 44.1 kHz,
48kHz and 96 kHz** (**DVD/LD only).
MONITOR
VIDEO OUT VIDEO IN VIDEO OUT
SPEAKERS
SURROUND
R L
L
AUDIO
OUT
R L
R
AUDIO OUT AUDIO IN
SUB
VIDEO
WOOFER
RF demodulator
Black
IMPEDANCE USE 8 – 16Ω
CENTER FRONT
R L
R L
DVD/LD
VIDEO IN
DIGITAL
DIGITAL
DVD/LD IN
DVD/LD IN
(COAXIAL)
(COAXIAL)
? / 1
or (OPTICAL)
(OPTICAL)
SPEAKERS DISPLAY
PRESET
– TUNING + –
DIMMER
MEMORY SHIFT FM MODE
PHONES
Black
Orange
Yellow (video)
White (L/audio)
Red (R/audio)
MULTI CHANNEL DECODING VIDEO DVD/LD TV/SAT
MD/TAPE CD TUNER AUX
INPUT MODE
MASTER VOLUME
+
LEVEL
SURR
SET UP
–
CINEMA STUDIO EX EQUALIZER
EQ NAME
TUNING +
A B C
SOUND FIELD MULTI CH IN
FM AM
MUTING
A.F.D. MODE 2CH
ENTER