Performing Initial Setup Operations - Sony HT-DDW830 Operating Instructions Manual

Perf orm ing Init ial Set up Operat ions
Once you have hooked up the speakers and turned on the
power, clear the receiver's memory. Then specify the
speaker parameters (size, position, etc.) and perform any
other initial setup operations necessary for your system.
Clearing t he receiver's m em ory
Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the following.
This procedure is not necessary if the demonstration
activates when you turn the power on.
1/u
? / 1
SPEAKERS DISPLAY
–
DIMMER
MEMORY
PHONES
1
Turn off the receiver.
2
Hold dow n ?/1 for four seconds.
The currently selected function, then the
demonstration message appears in the display and the
items including the following are reset or cleared:
• All preset stations are reset or cleared.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program source
and preset stations are cleared.
14
Downloaded from: https://www.usersmanualguide.com/
MULTI CHANNEL DECODING
INPUT MODE
LEVEL
SURR
SET UP
CINEMA STUDIO EX EQUALIZER
PRESET
EQ NAME
+ – +
TUNING TUNING
A B C
SOUND FIELD MULTI CH IN
SHIFT FM MODE FM AM
A.F.D. MODE 2CH
ENTER
Perf orm ing init ial set up operat ions
Before you use your receiver for the first time, use the SET
UP button to adjust settings to correspond to your system.
You can set the following items. For details on how to
adjust each setting, see the page in parentheses.
• Speaker size and placement (page 15).
• Speaker distance (page 17).
• Select the MULTI CH IN video signal (page 43).
• Whether the display turns off or not when you press
DIMMER (page 43).
Dem onst rat ion M ode
The demonstration will activate the first time you turn on
the power. When the demonstration starts, the following
VIDEO DVD/LD TV/SAT
message appears in the display:
MD/TAPE CD TUNER AUX
"NOW DEMONSTRATION MODE IF YOU FINISH
MASTER VOLUME
+
DEMONSTRATION PLEASE PRESS POWER KEY
–
WHILE THIS MESSAGE APPEARS IN THE DISPLAY
MUTING
THANK YOU"
To cancel the demonstration
Press ?/1 to turn the receiver off while the above message
is being displayed. The next time you turn the receiver on,
the demonstration will not appear.
To view the demonstration
Hold down SET UP and press ?/1 to turn on the power.
Notes
• Running the demonstration will clear the receiver's
memory. For details on what will be cleared, see
"Clearing the receiver's memory" on this page.
• There will be no sound when the demonstration mode is
activated.
• You cannot cancel demonstration if you did not press
?/1 while the above message is being displayed. To
cancel demonstration after the above message appears,
press ?/1 twice to activate the demonstration again.
Then, press ?/1 while the above message is being
displayed.