Table of Contents
Advertisement
Installation
3. Outdoor Unit
Choosing the installation location
Installation location requirements
• Do not place the outdoor unit on its side or upside down. Failing to do so
may cause the compressor lubrication oil to run into the cooling circuit
and lead to a serious damage to the unit.
• Install the unit in a well-ventilated location away from direct sunlight or
strong winds.
• Install the unit in a location that would not obstruct any passageways or
thoroughfares.
• Install the unit in a location that would not inconvenience or disturb your
neighbors, as they could be affected by the noise or the airflow coming
from the unit.
• Install the unit in a location where the pipes and the cables can be easily
connected to the indoor unit.
• Install the unit on a flat, stable surface that can withstand the weight
of the unit. Otherwise, the unit can generate noise and vibration during
operation.
• Install the unit so that the air flow is directed towards the open area.
• Maintain sufficient clearance around the outdoor unit, especially from a
radio, computer, stereo system, etc.
Fuse
Indoor Unit
Control
Stereo Computer etc
Air Guide Duct (This product is not provided by Samsung)
• Install the unit at a height where its base can be firmly fixed in place.
• Make sure that the water dripping from the drain hose runs away
correctly and safely.
Fuse
1.5 m or more
1.5 m or more
300 mm
Outdoor Unit
200 mm
CAUTION
• You have just purchased a system air conditioner and it has been
installed by your installation specialist.
• This device must be installed according to the national electrical
rules.
• If your outdoor unit exceeds a net weight of 60 kg, do not install it on
a suspended wall, but stand it on a floor.
• When installing the outdoor unit at the seaside, make sure that it is not
directly exposed to sea breeze. If you cannot find an adequate place free
from direct sea breeze, construct a protection wall or a protective fence.
‐ Install the outdoor unit in a place (such as near buildings etc.) where
it can be prevented from sea breeze. Failure to do so may cause a
damage to the outdoor unit.
Sea breeze
Sea
Outdoor Unit
• If you cannot avoid installing the outdoor unit at the seaside, construct a
protection wall around to block the sea breeze.
• Construct a protection wall with a solid material such as concrete to
block the sea breeze. Make sure that the height and the width of the wall
are 1.5 times larger than the size of the outdoor unit. Also, secure a space
larger than 700 mm between the protection wall and the outdoor unit for
exhausted air to ventilate.
Sea breeze
Sea
CAUTION
• Depending on the condition of power supply, unstable power or voltage
may cause malfunction of the parts or control system. (At the ship or
places using power supply from electric generator...etc)
Sea breeze
Sea
Outdoor Unit
Outdoor Unit
Protection wall
105
Advertisement
Table of Contents
