Chapter C: Rf Multiplexer Error Messages - HP E1472A User Manual

Appendix C
RF Multiplexer Error Messages
Table C-1 lists the error messages associated with the RF Multiplexer module
programmed by SCPI. See the appropriate mainframe manual for a complete list of
error messages.
Table C-1. RF Multiplexer Error Messages
Number Title
–224 Illegal Parameter
2000 Invalid Card Number
2001 Invalid Channel Number
2006 Command not supported on
this card
2009 Too many channels in
channel list
2010 Scan mode not supported
on this card
2600 Function not supported on
this card
2601 Channel list required
Potential Cause
Attempting to execute a command with a
parameter not applicable to the command.
Addressing a module (card) in a switchbox that is
not part of the switchbox.
Attempting to address a channel of module in a
switchbox that is not supported by the module
(e.g., channel 99 of a multiplexer module).
Sending a command to a module (card) in a
switchbox that is unsupported by the module.
Attempting to address more channels than
available in the switchbox.
Sending a command to a module (card) in a
switchbox that is unsupported by the module.
Sending a command to a module (card) in a
switchbox that is not supported by the module or
switchbox.
Sending a command requiring a channel list
without the channel list.
Error Messages 65
C