Maintenance And Cleaning; Cleaning And Disinfection - Belmont Quolis Q5500 Instructions For Use Manual

6 Maintenance and Cleaning

×
6-1 Cleaning and disinfection
Clean this chair before and after use to maintain it in a clean state.
WARNING
Turn off the power switch and unplug the power plug before cleaning.
Failure to do so can result in electric shock or fire. This step will also
prevent sudden movement of the chair while cleaning, which can
result in injury.
Do not wash with water.This may cause failure or electric shock.
Poor cleaning may cause bacteria to grow, posing a health risk.
CAUTION
The metal parts and mechanical parts of the chair may have sharp
edges. Exercise care to prevent injury to hands, fingers or other body
parts when cleaning chair.
Upholstery and Plastic Parts
Wipe surfaces gently with a dry soft cloth.
For extremely dirty surfaces:
Wipe off any stains or dirt with a soft cloth that has been moistened
with a neutral detergent diluted with water to approximately 10%.
Afterward, wipe surface with a damp cloth to remove detergent, then
thoroughly wipe it dry.
Parts touched by the patient:
Use a soft cloth saturated with disinfectant to clean the cushion parts,
such as the headrest, backrest, seat, and armrest, as well as
the other parts possibly touched by the patient.
As an example of disinfectant solutions for cleaning, use OPTIM33TB
manufactured by SciCan.
Control Panels and Metal Parts
Wipe surfaces clean using a dry soft cloth.
Do not clean these parts with a wet cloth because they are
adverselyreadily affected by moisture and water. Wipe off all moisture
immediately if any water gets on these parts. Water left on these parts
will result in rust or malfunction of electronic parts.
32