Huawei EchoLife EG8240H5 Quick Start Manual page 5

EchoLife EG8240H5
Quick Start for QR code
2.
3.
Issue 04 (2020-09-22)
Select a proper drill bit according to the outer diameter of the screws. Use a
hammer drill to drill the marked positions on the wall. Then clean the holes
and install two expansion bolts.
Use a screwdriver to fasten the screws into the expansion bolts, reserving 5
mm ends out of the wall, and mount the ONT onto the screws.
NO TE
It is recommended that the screw be about 4 mm in diameter and longer than 20 mm.
Copyright © Huawei Technologies Co., Ltd.
1 Placing the Device
2