Advertisement
4.8.
FITTING THE CARTRIDGE FILTER (fig. 4) for dry Hepa vaccuming.
4.8.1.
For dry vacuuming, slip the cartridge filter (Fig 4.13) over the filter cage. The cartridge filter (Fig 4.13) is suitable for dry-vacuuming only.
FITTING THE CLOTH FILTER (fig.5)
For dry-vacuuming, slip the cloth filter (Fig 5.14) over the filter cage, this is suitable for dry-vacuuming only.
4.8.2.
ASSEMBLE 4 PCS SUNCTION HOSE HOLDERS (Fig 6.20) by pushing the holders through the slots on the appliance
head (fig.2.3),and put on the suction hose for storage.(Fig.6.21 is for the nozzle storage.
4.9.
FITTING THE SUCTION HOSE (Fig.7.9, Fig.8.8)
Connect the suction hose (Fig.1.10) to the corresponding connector on the head assembly, depending on the application required.
4.10.
INSTALLING THE BATTERY (fig.9)
4.10.1.
Open the battery cover (Fig 9.16), Do this by swinging up the cover as shown in fig.9. Then insert the battery pack (18) into the mount
and push it forward until you hear the battery engage. Battery not supplied see specifications not supplied with product.
To remove the battery pack, press the side push lock button (Fig 9.19) of the battery pack, pull the battery pack away from the mount.
5. OPERATION
WARNING! Ensure you read, understand and apply Section 1 'Safety Instructions'. Reminder: DO NOT vacuum hazardous substances.
‰
Use of an incorrect filter will invalidate your warranty.
WARNING! Remove battery before assembly or making adjustments.
‰
5.1.
VACUUMING
5.1.1.
Connect the suction hose (Fig.8.8) to the suction hose connector (fig.10 & fig.11)
© Jack Sealey Limited
fig.4
fig.6
fig.8
fig.10
Original Language Version
fig.5
fig.7
fig.9
fig.11
CP20VWDV
Issue 2 15/11/22
Advertisement
