Sealey CPV144.V2 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS
INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
KEEP THESE INSTRUCTIONS FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1. GENERAL
Keep the vac clean and in good condition.

Replace or repair damaged parts. Use recommended

parts only. Unauthorised parts may be dangerous and
will invalidate the warranty.
Keep children and non-essential persons away from the

work area.
DO NOT leave the vac operating unattended.

DO NOT use the vac for a task it is not designed for.

DO NOT operate the vac when you are tired or under

the influence of alcohol, drugs or intoxicating medication.
DO NOT operate the vac if any parts are missing or

damaged, as this may cause failure and/or personal
injury.
Stay alert, watch what you are doing and use common

sense when operating vac.
Do not allow persons unfamiliar with the vac or these

instructions to operate the vac.
Ensure the switch is in the off position before inserting

battery pack.
Recharge only with the charger supplied.

Use vac only with specifically designated battery packs.

WARNING! Under extreme conditions, liquid may be

ejected from the battery: avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts
eyes, also seek medical help.
WARNING! Sparks inside motor can ignite flammable

vapours or dust. To avoid fire or explosion do not use
near flammable or combustible liquids or gases.
DO NOT vacuum anything that is burning or smoking

such as cigarettes, matches or hot ashes.
DO NOT vacuum toxic materials to avoid health hazards

from vapours or dusts.
Keep the vac and all accessories where they will not be

subjected to heat or flame. To avoid injury, shock, or fire,
never use a damaged vac, cord or charger.
DO NOT put any object into openings.

DO NOT use with any opening blocked.

Keep free of dust, lint, hair, and anything that may

reduce air flow. Keep hair, loose clothing, fingers away
from openings and moving parts.
DO NOT use for dry vacuuming without filter in place.

DO NOT use any charger other than the one with the vac.

DO NOT handle plug or charging unit with wet hands.

Replace or repair damaged parts. Use recommended

parts only. Unauthorised parts may be dangerous and
will invalidate the warranty.
1.2. BATTERY SAFETY
BATTERIES MAY BE DANGEROUS IF NOT HANDLED
WITH CARE AND ACCORDING TO THESE
INSTRUCTIONS.
Before removing battery from charger or vac, remove

personal metallic items such as rings, bracelets,
necklaces and watches.
Ensure the charger is switched off and disconnected

before attempting to remove the battery.
.






1.3. ELECTRICAL SAFETY
 WARNING! It is the user's responsibility to read, under
1.3.1. The Electricity At Work Act 1989 requires all portable
1.3.2. The Health & Safety at Work Act 1974 makes owners
1.3.3. You must ensure that you:









Original Language Version
INSTRUCTIONS FOR:
CORDLESS WET/DRY
RECHARGEABLE VAC
MODEL No:
If the battery terminals are corroded or dirty, clean
them before replacing battery.
DO NOT dis-assemble the battery for any reason.
WARNING! DO NOT allow metal objects to touch both
battery terminals simultaneously. Arcing or short circuit
will result.
DO NOT allow battery terminals to make contact with
any other metallic part.
DO NOT leave battery in a discharged state, recharge
battery immediately. If the vac is not in use, recharge the
battery every three months.
Dispose of the old battery in accordance with local
authority acid battery regulations. DO NOT dispose of
with regular refuse.
USE ONLY SUPPLIED CHARGER PLUG FOR VAC.
stand and comply with the following electrical
instructions: You must ensure the risk of electric shock is
minimised by the installation of appropriate safety
devices. An RCCB (Residual Current Circuit Breaker
should be incorporated in the main distribution board.
We also recommend that an RCD (Residual Current
Device) is used with all electrical products, particularly
portable equipment which is plugged into an electrical
supply not protected by an RCCB.
You must also read and understand the following
instructions concerning electrical safety.
electrical appliances, if used on business premises, to
be tested by a qualified electrician, using a Portable
Appliance Tester (PAT), at least once a year.
of electrical appliances responsible for the safe condition
of the appliance and the safety of the appliance operator.
If in any doubt about electrical safety, contact a
qualified electrician.
Inspect the charger plug, cable and connector for wear
and damage to ensure items are safe before connecting
to the mains power supply. If worn or damaged DO NOT
use.
Check cables are always protected against short circuit
and overload.
Important: Check that the voltage marked on the charger
plug is the same as the power supply to be used.
Uncoil the cable between charger and the charger base.
DO NOT pull the charger plug from the mains socket by
the lead.
DO NOT use any other type of charger with this product.
DO NOT try to take the charger plug apart.
DO NOT use the charger plug to charge or power any
other electrical item.
DO NOT get charger wet, or use in wet, damp conditions
(for indoor use only).
CPV144.V2
CPV144.V2 Issue: 3 - 17/01/12