Siemens SL10 Repair Documentation page 10

3.4 Repair Documentation
3.4.1 Description of procedure:
3.4.1.1 Diagnosis
3.4.1.2 Repair by component change
3.4.1.3 Repair by SW-Booting
3.4.1.4 Test
V1.3
Check the status of the fuse by measuring its resistance with
a multimeter. The fuse is defective if the resistance is higher than 10
ohms.
Use soldering iron to remove defective fuse.
Avoid excessive heat!
Watch surrounding components!
Resolder new fuse afterwards.
Not possible!
Retest handset after repair as described above.
The resistance must now be close to zero.
Page 10 of 31
Information and Communication Products
Communication Devices
ICP CD ST
D. Schnoor
08/98