English CORDLESS GREASE GUN DCGG581 Congratulations! WARNING: To reduce the risk of injury, read the You have chosen a D WALT tool. Years of experience, thorough instruction manual. product development and innovation make D WALT one of the Definitions: Safety Guidelines most reliable partners for professional power tool users.
English d ) Store idle power tools out of the reach of children b ) Never service damaged battery packs. Service and do not allow persons unfamiliar with the power of battery packs should only be performed by the tool or these instructions to operate the power tool. manufacturer or authorised service providers.
English Chargers when there is no battery pack in the cavity. Unplug charger before attempting to clean. WALT chargers require no adjustment and are designed to be • DO NOT attempt to charge the battery pack with any as easy as possible to operate. chargers other than the ones in this manual.
English nOTE: To ensure maximum performance and life of lithium‑ion Charger Cleaning Instructions battery packs, charge the battery pack fully before first use. WARNING: Shock hazard. Disconnect the charger from the AC outlet before cleaning. Dirt and grease Charger Operation may be removed from the exterior of the charger using a Refer to the indicators below for the charge status of the battery pack.
English may result. Damaged battery packs should be returned to the FLEXVOLT battery is in a 54V or a 108V (two 54V batteries) service centre for recycling. product, it will operate as a 54V battery. WARNING: Fire hazard. Do not store or carry the Transport Mode: When the cap is attached to the FLEXVOLT battery pack so that metal objects can contact battery, the battery is in Transport mode.
English Date Code Position (Fig. B) Discard the battery pack with due care for The date code 33 , which also includes the year of manufacture, the environment. is printed into the housing. Example: Charge D WALT battery packs only with designated WALT chargers. Charging battery packs other than 2022 XX XX the designated D WALT batteries with a D...
Page 12
English Variable Speed Trigger Switch (Fig. A, D) • This product is not intended for use by persons (including children) suffering from diminished physical, sensory or Lock-Off Button and Trigger Switch mental abilities; lack of experience, knowledge or skills Your grease gun is equipped with a lock‑off button 2 ...
Page 13
English installing The low Pressure Coupler (not supplied With 2. Unscrew the grease tube assembly 13 from the grease gun and remove. The Tool) 3. Gently release the grease tube handle 11 to expel the 1. Thread the grease tube assembly 13 ...
English OPERATION Speed Selection (Fig. A) The DCGG581 features two speed settings for greater versatility. Instructions for Use speed 1, low pressure/high flow, is recommended for general WARNING: Always observe the safety instructions and lubrication applications. speed 2, high pressure/low flow, is applicable regulations.
English Optional Accessories Protecting the Environment Separate collection. Products and batteries marked WARNING: Since accessories, other than those offered with this symbol must not be disposed of with by D WALT, have not been tested with this product, use normal household waste. of such accessories with this tool could be hazardous.
Page 16
Australia / new Zealand www.dewalt.com.au WALT Tel: Aust 1800 654 155 www.dewalt.co.nz 810 Whitehorse Road Box Hill Tel: NZ 0800 339 258 VIC 3128 Australia NA262606 12/22...