Inspecting Product And Delivery Items; Identifying Product; Checking Delivery Items; Inspecting Product - ABB RELION REX640 Installation Manual

Unpacking, inspecting and storing
3.2

Inspecting product and delivery items

3.2.1

Identifying product

1.
2.
3.2.2

Checking delivery items

• Check that all items are included in the delivery in accordance with the delivery
documents.
3.2.3

Inspecting product

Protection relays require careful handling before installation on site.
• Check the protection relay to see if any damage occurred during transportation.
If the protection relay has been damaged during transportation, make a claim
against the transport contractor, and notify the local ABB representative.
3.2.4

Returning a product damaged in transportation

If damage has occurred during transportation, appropriate actions must be taken
against the latest carrier. Inform the nearest ABB office or representative.
ABB should be notified immediately if there are any discrepancies in relation to the
delivery documents.
3.3

Storing

If the protection relay is stored before installation, it must be done in the original
transport packaging in a dry and dust-free place.
• Observe the environmental requirements stated in the technical manual.
16
Locate the protection relay's order number on the label attached to the
protection relay's case.
Compare the protection relay's order number with the ordering information to
verify that the received product is correct.
1MRS759115 E
REX640
Installation Manual