Writing Text; Writing Text By Using Navi Roller - Nokia 7110 User Manual

5. Writing text

You can enter text (for example, in phone book or in calendar) by
using the Navi Roller or by using the traditional text input. The tra-
ditional text input is indicated by
put is also available; when the traditional text input is in use.
When using the Navi Roller, you write text by selecting characters
from the character bar displayed in the far right of the display. In
the traditional text input, you enter text by pressing a number key
(from to ) repeatedly until the desired character appears
on the display.
For writing text messages you can also use the predictive text input.
In the predictive text input you only press a number key once for one
letter. The predictive text input is indicated by
input method may not be available for all languages.

Writing text by using Navi Roller

1. Roll with Navi Roller to the desired charac-
ter or number. The character bar is displayed
in the far right of the display.
2. Press Navi Roller to insert the highlighted
character or number.
• If you make a mistake, you can remove characters to the left by
pressing Clear as many times as needed. Pressing and holding
Clear clears the display.
• To move the cursor, roll through the character bar to one of the
arrow symbols and press Navi Roller to move the cursor in the
direction of the highlighted arrow symbol.
You can also move the cursor by first pressing Options, then
pressing Navi Roller at Move cursor. Roll with Navi Roller to
the desired location and press Done to move the cursor.
©2000 Nokia Mobile Phones. All rights reserved.
Writing text
. Note that the Navi Roller in-
. Note that this
33